Select your vehicle

Artec 3/4 Inch High Misalignment Spacers – SP1202

Artec Industries

Shop Artec Industries Heim Joints on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Two 3/4 inch high misalignment spacers for one rod end
  • 3/4 inch bore, Universal Fit
  • Artec Industries part number SP1202, UPC 816791023278

Description

Overview

The Artec Industries SP1202 is a set of two high misalignment spacers with a 3/4 inch bore, made for one rod end. Spacers of this kind move a rod end off-center so the joint sits correctly in its mount.

Artec gives Universal Fit as the only fitment. Because no vehicle is named, treat the SP1202 as a general fabrication part and match it to your own linkage layout.

Key features

  • Pair of high misalignment spacers for one rod end
  • Bore measures 3/4 inch
  • Universal Fit with no vehicle restriction given
  • Artec part number SP1202 and UPC 816791023278

Check the joint before assembly

Before fitting a spacer, confirm the joint geometry with the link in its intended position. A spacer that looks correct when the link is unloaded can bind once the suspension moves, so cycle the joint by hand through its range before tightening anything. Note any spot where the spacer contacts the mount or the body, and adjust the layout before final assembly.

Good preparation also means checking the threads and the bore. Clean the threads, test the fit of the spacer on the rod end, and make sure the jam nut has enough room to lock. Recheck the joint after the first short trial, since settling of the parts can change the spacer position slightly.

  • Cycle the joint through its range before tightening
  • Check clearance at the mount and body
  • Clean threads before assembly
  • Recheck position after a short trial

Specifications

Brand Artec Industries
Part number SP1202
UPC 816791023278
Included 2 spacers
Bore 3/4 inch
Fitment Universal Fit

Vehicle fitment

Universal Fit is the only fitment Artec gives, so this spacer is not matched to a particular vehicle.

Match the spacer to your linkage layout, since no vehicle model, year or chassis code is tied to it.

Installation notes

Test-fit the spacers in the rod end bore before final assembly to confirm the 3/4 inch fit.

What’s included

Two high misalignment spacers for one rod end.

Not included: the rod end, which is needed to use the spacers.

SKU: A/ISP1202 Category:

Specification

Shipping weight 0.20 lbs
Package dimensions 6.00 × 6.00 × 6.00 in
brands

Questions & Answers

What is the Artec SP1202 used for?

It is a high misalignment spacer with a 3/4 inch bore, supplied as two spacers for one rod end. Builders use spacers like this to adjust how a rod end sits in a mount within custom linkage.

Does the SP1202 fit a specific vehicle?

No vehicle is named. Artec lists Universal Fit only, so the spacer is not tied to a make, year or model. Fit depends on the rod end and linkage you use with it.

How many spacers come with the SP1202?

Two. The set includes two spacers for one rod end. The rod end itself is not part of the set, so you will need to supply one before the spacers can be used.

What should be checked before using misalignment spacers in a tight build?

Check clearance at the mount, body and any nearby tubing with the link at full travel. Confirm the spacer seats square and the jam nut can lock, then recheck the joint after the first short test run.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Artec Industries Heim Joints on Amazon