Overview
The ARB BP5160022 is a front Old Man Emu BP-51 bypass shock absorber from ARB 4×4 Accessories for the 2007–2018 Jeep Wrangler (JK), covering the Wrangler and Unlimited trim families. It is a direct fit, gas charged, and designed for a 3-4 in. lift.
The BP-51 range was developed by Old Man Emu, and ARB says its shocks combine a comfortable ride around town with significant end-zone damping for control off road. The remote reservoir and bypass valving are the core of the design, and the body is aluminum for durability.
The big bore body is designed to fit without any vehicle modification. It gives a comfortable ride around town and a more controlled feel over challenging terrain, using patent-pending bypass technology. Part number BP5160022 and UPC 9332018037084 identify the unit. The mount part VM80010014 is required for installation, so check it before ordering.
Bypass damping works alongside speed-sensitive damping. As the piston approaches full compression or extension, the damping rises, so the shock slows before the bump stop and takes large bumps and corrugations smoothly.
Key features
- Bypass damping that depends on piston position
- Remote reservoir design
- Installs without any extra vehicle modification.
- Aircraft-grade 6061 T6 aluminum body
- Designed for a 3-4 in. lift
Choosing a lift-matched shock
Lift height changes the geometry of the front suspension, so a shock must be matched to the ride height it is designed for. A shock with a body length that does not suit the setup can run out of travel early or sit with too little extension at full droop. Matching the shock to the spring and lift is the first step before any tuning.
Bypass shocks with a remote reservoir handle heat better than many standard units, which matters on long climbs and descents. Because the reservoir needs space and a secure mount, check hose routing and clearance against the front crossmember and steering components before the vehicle is driven.
After installation, check that the shock moves freely through full travel and that the reservoir does not rub. Inspect the mounts and bushings at regular service intervals, and recheck fasteners after the first few trail runs. Oil seepage at the seals or a sudden change in ride quality usually means the shock needs attention.
- Match the shock to the lift and spring setup
- Check reservoir clearance and hose routing
- Recheck fasteners after the first trail runs
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | BP5160022 |
| UPC | 9332018037084 |
| Position | Front |
| Lift height | w/3-4 in. lift |
| Shock type | Gas charged |
| Body material | 6061 T6 aircraft-grade aluminum |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2007–2018 Jeep Wrangler (JK), covering the Sport, Sport S, Sahara, Rubicon and X versions and their Unlimited counterparts. Other Wrangler generations are not covered.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mount part number VM80010014 is required for installation. Because the lift is 3 to 4 inches, check the spring and ride height on your Wrangler against that figure before fitting the shock.
What’s included
The mount part VM80010014 is required and sold separately. Check the package contents against your installation before starting.


















