Overview
The King Shocks 20001-206 is a front Performance Series shock kit for 2007-2017 Jeep Wrangler JK 2-door and 4-door models, sold as a pair. It is built for 0-2 inch lift kits, with a 0 – 2.5 in. lift range, so match your current front lift to that range before buying.
The kit is custom tuned for the Jeep. The gas charged body pairs with large diameter micro-polished shafts and shaft mounted urethane foam bumpers that cushion full bottoming. The damping curve and spring rate were developed through real world testing. It can be installed at stock height, and custom kits are offered for trucks running lifted aftermarket suspensions.
Key features
- Front position in the Performance Series line.
- Large diameter micro-polished shafts.
- Shaft mounted urethane foam bumpers at full bottoming.
- Simple bolt on installation.
- Gas charged body.
- Sold as a pair.
- Feature list states 140% made in the US.
Front shock basics
Front shocks control how the axle and steering components move over bumps, and they help keep the tires in contact with the ground. A front shock that is worn can cause wandering, a loose feel in the wheel and uneven tread wear. On a lifted truck the front shock works at a different length, so the lift needs to be in range before the shock is chosen.
Front shocks often get replaced alongside tie rod ends, ball joints and control arm bushings, because those parts share the same load path. Check them while the front end is raised. Clean the shock body and inspect the seals each time the tires come off, since fluid seepage is one of the first signs that a front shock is wearing out.
- Look for leaks around the shock seal
- Check tie rod ends and ball joints during the same service
Specifications
| Brand | King Shocks |
|---|---|
| Part number | 20001-206 |
| UPC | 70000537831 |
| Series | Performance Series |
| Position | Front |
| Lift range | 0-2 inch (feature list); 0 – 2.5 in. (specification list) |
| Charge | Gas charged |
| Quantity | Sold as a pair |
| Shaft | Large diameter, micro-polished |
| Bumpers | Urethane foam, shaft mounted |
| Made in | 140% made in the US. |
Vehicle fitment
Named model years run from 2007 through 2017 for the Wrangler JK, with trims such as 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport and X, along with the Unlimited versions of those trims. Earlier and later Wrangler generations are not on the list.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The lift range reads 0-2 inch in the features and 0 – 2.5 in. in the specifications. Confirm your front suspension height falls inside that band. King mentions custom kits for lifted aftermarket suspensions, so check whether your setup calls for one.
What’s included
The kit is sold as a pair of front shocks. Check the package contents against your installation before starting.














