Overview
The ARB Old Man Emu 2 Inch Lift Kit (Heavy Load), part number OMETAC16HKSB, is a heavy duty sport suspension kit for the 2016-2017 Toyota Tacoma. It is intended for the extra weight of aftermarket bumpers and winches.
Old Man Emu builds tuned suspension systems so each setup can match how the vehicle is outfitted. The front geometry is adjusted to increase lift while keeping droop, down travel and alignment within range.
Key features
- Heavy duty sport kit for aftermarket bumpers and winches
- Coil springs at the front
- Nitrocharger Sport struts at the front
- Leaf springs, U-bolts and bushing kit at the rear
- Rear drive shaft spacer kit
Heavy duty sport setup
Heavy duty sport setups add support where extra weight lands, which is mainly the front bumper and winch. Coil springs and Nitrocharger Sport struts at the front carry that load, while the leaf springs and U-bolts handle the rear. A heavier front end changes how the truck settles, so the damping and spring rate work as a pair.
The rear drive shaft spacer changes the driveline angle, so the shaft and its joints should be checked after installation and at regular intervals. U-bolts and bushings on the leaf springs can loosen with use, which is why a recheck after the first drive matters. Struts, shocks and bushings wear faster under added weight, so inspect them more often than on a stock truck.
- Retighten U-bolts after the first few drives
- Check the rear drive shaft and joints at each service
- Inspect struts for leaks and worn mounts
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | OMETAC16HKSB |
| UPC | 700008185191 |
| Lift height | 2 inches |
| Load setup | Heavy duty sport, for extra weight such as aftermarket bumpers and winches |
| Included | Coil springs, Nitrocharger Sport struts, leaf springs, U-bolts, rear drive shaft spacer kit and leaf spring bushing kit |
Vehicle fitment
2016-2017 Toyota Tacoma, in the Limited, SR, SR5, TRD Off-Road, TRD Pro and TRD Sport trims.
It is not for the 2018 and later Tacoma, or for the lighter load OME 16 kit (OMETAC16LKSB). Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit combines coil springs, leaf springs and drive shaft spacers, so have the alignment, driveline angles and the rear drive shaft checked after installation. After the first drive, recheck the U-bolts and the rear spacer, since the kit combines leaf and coil springs at the two ends.
What’s included
Coil springs, Nitrocharger Sport struts, leaf springs, U-bolts, rear drive shaft spacer kit and leaf spring bushing kit.









