Overview
The ARB OMEGQPR05 is a rear polyurethane fitting kit, 5 mm, for Old Man Emu coil springs. It is an isolator that sits between the coil spring and the body, and it is intended to cushion the spring and remove squeaking and clunking.
Key features
- Polyurethane isolator placed between the coil and the body
- Intended to remove spring-related squeaking and clunking
- It is a rear kit at 5 mm.
- Part number OMEGQPR05 with UPC 9332018002341
Isolator wear and noise
A rear isolator works constantly as the axle moves, so it is one of the first pieces to show fatigue. Polyurethane can crack, flatten or pull out of its seat, and each of these can bring back the squeaks and clunks it was fitted to stop. Rough tracks tend to reveal wear sooner than road driving.
When the rear coil is out, look at the pad surface, the seat and the bolts together. A clean pad sitting centered on its seat is the goal. If the pad has shifted, reseat it before the coil goes back in, and recheck everything after the first few trips.
- Listen for squeaks or clunks over bumps
- Inspect the pad after rough trail use
- Make sure the pad sits centered on its seat
Specifications
| Brand | ARB 4×4 Accessories (Old Man Emu) |
|---|---|
| Part number | OMEGQPR05 |
| UPC | 9332018002341 |
| Position | Rear |
| Size | 5 mm |
| Material | Polyurethane |
| Type | Coil spring fitting kit |
Vehicle fitment
Fit depends on your vehicle’s year, model and trim, so check these before buying.
Confirm the fit with the manufacturer before ordering, and confirm your vehicle’s year, model and trim before ordering.
What’s included
One rear coil spring fitting kit.








