Overview
The Fabtech FTS24200 is a 3 in. coil spring spacer kit for the Jeep Wrangler JL four-door. Front steel and rear billet spacers keep the stock coils in place while the vehicle is raised, and four bump stop extensions control suspension travel within factory specifications. It fits the 2018 Wrangler JL Unlimited.
Compatible part numbers are K4100, K4101M, K4101DL and K4102DL. Match them to your current lift kit before installing.
Key features
- Front steel coil spring spacers
- Rear billet coil spring spacers
- Four bump stop extensions
- Keeps the stock coils in place
- 3 in. lift
- Direct fit for the 2018 Jeep Wrangler JL Unlimited
Bump stops and travel
Spacers raise the body while keeping the factory coil springs in use, so suspension geometry changes less than with a full lift kit. Bump stop extensions limit how far the axle can compress before the bump stop contacts, which protects the stock components. Front and rear travel should be checked after installation, especially on a Rubicon with larger tires.
Spacers rely on the rest of the suspension being in good condition, so inspect shocks, bushings and control arms before fitting. Worn shocks reduce control at higher ride heights, and cracked bump stops should be replaced rather than reused. A wheel alignment is commonly needed after any height change.
- Inspect shocks before installing
- Check bump stops for cracks
- Align the front end after installation
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS24200 |
| UPC | 674866106284 |
| Lift height | 3 in. |
| Front spacers | Steel |
| Rear spacers | Billet |
| Bump stop extensions | Four |
| Compatible part numbers | K4100, K4101M, K4101DL, K4102DL |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2018 Jeep Wrangler (JL) Unlimited Rubicon, Unlimited Sahara, Unlimited Sport and Unlimited Sport S.
Confirm your vehicle’s year, model and trim before ordering, as this kit covers 2018 Unlimited trims.
Installation notes
The four bump stop extensions are part of this setup, so review them alongside the spacers during installation. Check the spacer part numbers against your lift kit first.
What’s included
Front steel coil spring spacers, rear billet coil spring spacers and four bump stop extensions.
Not included: Confirm which lift kit your build uses before installing the spacers.







