Overview
The Rancho QuickLIFT Coil Spring Spacer Lift Kit, part RS70082, is a front spacer kit made of polyurethane. It fits Jeep Wrangler JK, LJ and TJ models.
The spacers measure 3/4 inch, but the kit is rated for a 1 inch lift. Confirm the height you need before ordering, since the two figures do not match.
Key features
- Front position
- Polyurethane spacers
- Two spacers, with instructions
- Fits 2 and 4-door models
Alignment after a spacer install
Coil spacers raise the front end by changing the spring seat position, which changes ride height and the angle of the control arms. That shift can alter caster and camber, so an alignment check after installation helps keep tire wear even and steering predictable. Driveline angles also change with height, and a close look at the front driveshaft after the first drive is worthwhile.
Because spacers do not change shock length, the shocks may need a look when the lift is significant. Owners who add larger tires often revisit steering and brake hose length too. Keep the old springs and hardware in a safe place in case the kit needs to come off, and retorque fasteners after a short drive.
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS70082 |
| UPC | 39703700825 |
| Position | Front |
| Material | Polyurethane |
| Spacer height | 3/4 inch |
| Lift height | 1 inch lift rating; spacers measure 3/4 inch. Confirm the lift height you need before ordering. |
| Fitment | Direct fit |
Vehicle fitment
This front spacer kit fits the 2007 to 2018 Jeep Wrangler JK, the 2004 to 2006 Wrangler LJ Unlimited and the 1997 to 2006 Wrangler TJ, across the trim lines for those years.
The JL Wrangler (2018 and later) and the Gladiator are not in this list.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Install the spacers on the front coil springs following the included instructions, then check the alignment.
What’s included
Two polyurethane coil spring spacers and installation instructions.









