Select your vehicle

ARB 2.5 Inch Lift Kit (Light Duty) – OMETUN57LKS

ARB 4x4 Accessories

Shop Toyota Tundra Lift Kits on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • ARB 2.5-inch light duty lift kit, part number OMETUN57LKS
  • Fits the 2007-2014 Toyota Tundra
  • Lift height range 2.5 to 3.5 inches, shocks included
  • Leaf springs at the rear

Description

Overview

The ARB 2.5 Inch Lift Kit (Light Duty), part number OMETUN57LKS, is an Old Man Emu coil spring kit with shocks included. It is built for light duty use and gives a lift height range of 2.5 to 3.5 inches.

The kit is built for the 2007-2014 Toyota Tundra, covering the 1794 Edition, Base, Limited, Platinum, SR and SR5 trims.

Key features

  • Light duty coil spring kit
  • Lift height range 2.5 to 3.5 inches
  • Shocks included
  • Leaf springs at the rear

Light duty Tundra setup

A light duty coil spring kit suits Tundras used for daily driving and moderate loads. The coils carry the added height at the front, while the leaf springs at the rear keep the setup simple to service. Shock control is part of the lift, so the damping works with the new spring height.

Lifted trucks handle differently, and the change is most noticeable in braking and in crosswinds at highway speed. Check alignment and the driveline after installation, and watch the rear leaf springs for sag over time. A sagging rear pack lowers the back of the truck and can change the lift height. Keep an eye on the bushings and shackles as they wear.

  • Check the rear leaf pack for sag at every service
  • Inspect bushings and shackles for wear
  • Recheck driveline angles after any change in load

Specifications

Brand ARB 4×4 Accessories
Part number OMETUN57LKS
UPC 933201802701
Lift height range 2.5 to 3.5 inches
Suspension type Coil spring kit
Rear lift method Leaf springs
Shocks Included
Load setup Light duty

Vehicle fitment

Fitment covers the 2007-2014 Toyota Tundra in the 1794 Edition, Base, Limited, Platinum, SR and SR5 trims.

It is not for other Tundra generations or for trucks that carry heavy bumpers or winches. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

A coil and leaf spring lift changes the alignment and driveline angles, so both should be checked after installation. The lift range is 2.5 to 3.5 inches, and the final height depends on the vehicle and its load.

What’s included

Coil springs, leaf springs and shocks.

SKU: ARBOMETUN57LKS Category:

Specification

Shipping weight 237.84 lbs
Package dimensions 0.00 × 0.00 × 0.00 in
brands

Fitment

VehicleYearsTrims
Toyota Tundra2007–20141794 Edition, Base, Limited, Platinum, SR, SR5

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the OMETUN57LKS fit a 2016 Tundra?

No. It fits the 2007-2014 Toyota Tundra only, so a 2016 model is not covered. Check the model year and trim before ordering.

Are shocks included with the OMETUN57LKS kit?

Yes. Shocks are included with this light duty kit, so no separate shocks are needed for the lift. Check the shock length against the new ride height.

What lift range does the OMETUN57LKS kit give?

The lift range is 2.5 to 3.5 inches for this light duty kit. The actual lift depends on the vehicle, the load and the trim it is fitted to.

How do I tell if the rear leaf springs are worn?

Look for a rear end that sits lower than the front, leaves that have cracked or shifted, and loose or broken clamps. A worn pack can lose its arch under load, which changes the lift height and the driveline angle.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Toyota Tundra Lift Kits on Amazon