Select your vehicle
-13%

ARB 2 Inch Lift Kit (Heavy Load) – OMETAC04HKS

ARB 4x4 Accessories

Shop ARB 4X4 Accessories Lift Kits on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • ARB 2-inch heavy load lift kit, part number OMETAC04HKS
  • Lift height range 0 to 2.25 inches
  • Shocks included, leaf springs at the rear
  • Direct fit label from the manufacturer

Description

Overview

The ARB 2 Inch Lift Kit (Heavy Load), part number OMETAC04HKS, is an Old Man Emu coil spring kit with shocks included. It gives a lift height range of 0 to 2.25 inches.

The rear lift method is leaf springs, while the suspension type is a coil spring kit. The kit carries a 2 year/24,000 mile warranty.

Key features

  • Heavy load setup
  • Lift height range 0 to 2.25 inches
  • Shocks included
  • Coil spring kit with leaf springs at the rear

Mixed spring setups

Mixing coil springs with a leaf spring rear changes how the vehicle loads and rebounds. Coil springs and leaf springs each control the body differently, so the ride and steering feel can change in a way that a fully coil lift does not. Leaf springs also carry load differently across the axle, which is why the rear should be checked as part of the whole system.

Leaf packs can settle over time, so inspect the leaf springs, shackles and bushings for sag, cracks and wear before installing the lift. Replacing worn shackles and bushings at the same time keeps the new ride height steady. Check the bump stops and shock mounts too, and recheck fasteners after the first few drives.

Specifications

Brand ARB 4×4 Accessories
Part number OMETAC04HKS
UPC 700006844081
Lift height range 0 to 2.25 inches
Suspension type Coil spring kit
Rear lift method Leaf springs
Shocks Included
Load setup Heavy load

Vehicle fitment

Fit depends on the specific vehicle year, model and trim.

Confirm your vehicle’s year, model and trim before ordering, since the coil and leaf spring setup must match the model.

Installation notes

A lift with a mixed coil and leaf spring setup changes the alignment and driveline angles, so have both checked after installation. Heavy load kits are meant for added weight, so check the vehicle’s loaded weight against the kit before use.

What’s included

Coil springs, leaf springs and shocks.

SKU: ARBOMETAC04HKS Category:

Specification

Shipping weight 180.00 lbs
Package dimensions 48.00 × 48.00 × 24.00 in
brands

Questions & Answers

What is the lift on the OMETAC04HKS kit?

The lift height range is 0 to 2.25 inches for this heavy load kit. Actual lift depends on the load and the vehicle, so measure ride height after installation.

Are shocks included with the OMETAC04HKS?

Yes. Shocks are included with this heavy load kit, so no separate shocks are needed for the lift. The kit pairs a coil spring setup with leaf springs at the rear, so check both systems before installation.

Does the OMETAC04HKS use leaf springs?

Yes, at the rear. The rear lift method uses leaf springs, while the overall suspension type is a coil spring kit. Check the leaf spring setup against your vehicle before buying, and confirm fit for its year, model and trim.

Do leaf springs need replacing when adding a lift?

Not always. Inspect the leaf packs first. If they show sag, cracks or a low rear end, replacing them is worthwhile, since a worn leaf pack can work against the lift height. Shackles and bushings are often replaced at the same time.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop ARB 4X4 Accessories Lift Kits on Amazon