Overview
The ARB 2.5 Inch Lift Kit (Heavy Load), part number OMEJK2DHKS, is a coil spring suspension lift for the 2007-2018 Jeep Wrangler JK 2-door. It raises the front and rear by 2.5 inches and is set up for heavier loads.
The heavy load setup suits Jeeps carrying aftermarket bumpers or winches. The kit comes with NitroCharger shocks, coil springs, trim spacers and a Panhard rod extension bracket, with a 2 year/24,000 mile warranty.
Key features
- 2.5-inch lift height
- Heavy load setup for aftermarket bumpers and winches
- Coil springs front and rear
- NitroCharger shocks included
- Trim spacers included
- Panhard rod extension bracket included
Heavy loads and driving
Heavier front bumpers and winches change how a lifted Jeep handles, raising the center of gravity and adding weight at the front. Coil spring suspension is set up to carry that load, but braking distances and cornering can feel different, so take the first trips at a gentle pace and watch how the vehicle settles.
Shocks work hardest under added weight, so check their mounting hardware and look for leaks after the first few drives. Winch use puts sudden loads through the suspension and frame, so inspect the mounts after heavy pulls. Tire pressure and load distribution also affect ride, so check them whenever the vehicle carries gear.
- Check shock mounts after early drives
- Inspect winch mounts after heavy pulls
- Recheck fasteners periodically
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | OMEJK2DHKS |
| UPC | 9332018000040 |
| Lift height | 2.5 inches |
| Front lift method | Coil springs |
| Rear lift method | Coil springs |
| Shocks | NitroCharger shocks included |
| Load setup | Heavy load |
| Warranty | 2 year/24,000 mile |
Vehicle fitment
It fits the 2007-2018 Jeep Wrangler JK 2-door, from the 07 model year onward.
It is not for the four-door Wrangler Unlimited or the JL generation from 2018 on. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A 2.5-inch lift changes the suspension geometry, so have the front alignment checked after installation and measure the driveline angles. The Panhard rod extension bracket is part of the heavy load setup, so check the rear track after the lift. Drive carefully on the first trips, since a lifted Jeep with a heavy bumper handles differently.
What’s included
Coil springs front and rear, NitroCharger shocks, trim spacers and a Panhard rod extension bracket.


