Overview
The Omix-ADA 16916.01 is a stock bellhousing for 6 or 8 cylinder engines with T-150 and T-170 transmissions. It replaces the factory T18 bellhousing used on 1976–1979 CJ models.
It fits the 1976–1983 Jeep CJ5, the 1976–1986 Jeep CJ7 and the 1985 Jeep Scrambler. It requires boot part 3236453, which does not come with the bellhousing.
Key features
- Stock bellhousing design
- Fits 6 or 8 cylinder engines
- Compatible with T-150 and T-170 transmissions
- Replaces the factory T18 bellhousing on 1976–1979 CJ models
- Requires boot part 3236453
Clutch and pilot alignment
The bellhousing is the link between the engine and transmission. It holds the transmission in line with the crankshaft so the input shaft and clutch disc can work correctly, and it carries the clutch fork and release bearing. Any bend, crack or loose mounting in the bellhousing can throw that alignment off and produce clutch chatter or noisy shifting.
Before fitting a bellhousing, check the mounting faces and dowel locations on the engine block and transmission. A worn pilot bushing should be replaced while the transmission is out, and the clutch fork pivot and boot deserve a look as well. Because the boot is a separate part for this bellhousing, make sure it is on hand before the transmission goes back in.
- Inspect the bellhousing for cracks near the bolts
- Check dowel pins and mounting faces
- Replace the pilot bushing while access is open
- Look over the clutch fork and its pivot ball
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 16916.01 |
| UPC | 804314047566 |
| Engines | 6 or 8 cylinder |
| Transmissions | T-150 and T-170 (T-150 is a 3 speed) |
| Required boot | Part 3236453 |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1976–1983 Jeep CJ5, the 1976–1986 Jeep CJ7 and the 1985 Jeep Scrambler. Verify your year, model and trim before you buy, since CJ models after 1986, the CJ6 and Wrangler fall outside that range.
Jeep CJ models after 1986, the CJ6 and the Wrangler are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bellhousing requires boot part 3236453. It is for 6 or 8 cylinder engines paired with T-150 or T-170 transmissions.
What’s included
One stock bellhousing.
Not included: boot part 3236453, which the bellhousing requires.









