Overview
The King Shocks SPR3-16-700 is a 3-inch off-road coil spring made from high tensile chrome silicon wire. Its rating is 3 x 16 x 700 lbs, and it is wound specifically for off-road applications rather than repackaged car springs.
Spring rates, wire diameters and coil lengths were developed through real-world testing on all types of terrain. The design has been tested in events from Baja to Dakar. Over 10,000 springs are available to match different applications, so confirm the exact model against your vehicle’s year, model and trim before ordering.
Key features
- High tensile chrome silicon wire
- Coils closed and ground to sit flat and deflect true
- Wound specifically for off-road applications
- Manufactured in the USA.
- Rates, wire diameters and coil lengths developed through real-world testing
- Lifetime warranty to the original purchaser against sagging and breakage
- A spring that fails is replaced with no questions asked.
Spring rate and ride height
Spring rate determines how far a spring compresses under a given load, and that changes ride height as well as handling. A stiffer off-road spring holds the truck higher and resists sag under gear, but it can feel firm when the bed is empty. Compare the rate and length before buying so the spring matches the loads you carry.
Coil springs are often replaced along with shocks, since worn shocks cannot control a changed spring rate well. Inspect the spring seats, isolators and bump stops when the spring is removed. Check that the coils sit evenly on the seat before the truck is lowered.
- Match spring rate to typical payload
- Replace worn shocks alongside new springs
- Inspect spring seats for rust or cracks
- Check ride height after the first week of use
Specifications
| Brand | King Shocks |
|---|---|
| Part number | SPR3-16-700 |
| UPC | 700007235551 |
| Listed size and rating | 3 x 16 x 700 lbs |
| Wire material | High tensile chrome silicon |
| Coil ends | Closed and ground |
| Manufacturing location | USA |
| Warranty | Lifetime to original purchaser against sagging and breakage |
Vehicle fitment
Confirm the year, make, model and trim for your vehicle before ordering.
Because spring rate and length determine how a vehicle sits and carries load, compare the listed 3 x 16 x 700 lbs figures with the spring you are replacing. A spring is not a universal part.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Coil springs store a large amount of energy. Use a proper spring compressor and secure supports whenever the spring is removed or installed.
What’s included
Check the quantity and included items against your installation before starting.







