Select your vehicle

King Shocks 3 x 18″ 600Lbs Coil Spring for Coilover Shock – SPR3-18-600

King Shocks

Shop King Shocks Coil Springs on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • King coilover spring, 3 x 18 inches, 600 lb rating
  • Chrome silicon wire, made in the USA
  • Lifetime warranty to the original purchaser

Description

Overview

The King Shocks 3 x 18-inch 600 lb coil spring (part number SPR3-18-600) is an 18-inch long, 3-inch coil spring with a 600-pound rate for coilover shocks. It is made in the USA from chrome silicon wire.

King states its springs are wound for off-road use and are not repackaged car springs. Its spring rates, wire diameters and coil lengths were developed through testing on many types of terrain, and the company cites its designs used in Baja and Dakar racing.

Because the spring is 18 inches long, its rate and length need to match the shock travel and the vehicle’s load before it is fitted.

Key features

  • 600-pound spring rate.
  • 3 by 18-inch size
  • Chrome silicon wire
  • Made in the USA
  • Wound for off-road use

Checking length and clearance

An 18-inch coil spring is longer than many shorter coilover springs, so its free length has to fit the shock body and the space around it without rubbing or binding. Check the spring perch position, the bump stop and the room the spring has when the suspension compresses, since a long spring can reach the frame or body sooner than expected.

Length also changes preload and the way the spring sits when the vehicle is loaded. Measure the installed height before and after the install, and make sure the spring stays seated square on both ends. A spring that tilts in its perch wears quickly and can load the shock unevenly.

  • Confirm spring perch position before assembly
  • Check travel against the bump stop
  • Recheck seating after the first drive

Specifications

Brand King Shocks
Part number SPR3-18-600
Size 3 x 18 inches
Rate 600 pounds
Wire Chrome silicon
Origin Made in the USA

Vehicle fitment

Fit depends on the shock body, spring length and the vehicle’s load. Confirm all three, and your vehicle’s year, model and trim, before ordering.

Confirm the length and rate against the shock and the vehicle before buying. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Check that the 18-inch length fits the shock’s spring perch and the available space before the spring is installed. Use a proper spring compressor for a coilover spring.

What’s included

One coil spring, 3 by 18 inches, 600 pounds.

Questions & Answers

Does the King Shocks SPR3-18-600 fit my Jeep?

Fit depends on the coilover shock's spring perch and the vehicle's load. Confirm the 18-inch length and 600-pound rate suit both before buying.

What is the rate of the SPR3-18-600?

The spring has a 600-pound rate and measures 3 by 18 inches, so the rate and length both need to suit the shock and the vehicle's load.

Does King warrant this spring?

Yes. This spring is covered by a lifetime warranty for the original purchaser. Save the receipt in case warranty service is needed.

Does a longer coil spring change the ride height?

It can, depending on the free length, preload and how the spring seats in the shock's perch. Measure the installed height before and after the change to confirm it suits the vehicle.

How should a coilover spring be checked for wear?

Look for cracked or flattened coils, rust that has pitted the wire, and uneven height from one side to the other. Replace a spring that has sagged or shows cracks.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop King Shocks Coil Springs on Amazon