Overview
The King Shocks 3-inch Coil Spring (part number SPR3-14-150) is a coil spring for coilover shock absorbers. It is a 3-inch coil spring made in the USA from chrome silicon wire.
King designs its springs for off-road use rather than repackaging car springs. The spring rates, wire diameters and coil lengths were developed through testing on varied terrain, and the designs have been used in Baja and Dakar racing. Match the spring to the shock and the vehicle before buying.
Key features
- Chrome silicon wire, the material King uses for its springs
- Made in the USA
- Wound for off-road applications
- Closed and ground ends so the spring sits flat and deflects true
- Lifetime warranty to the original purchaser against sagging and breakage
Choosing a matched spring setup
Coil springs carry the vehicle’s weight and set its height, so the spring and shock work as one unit. A coilover spring must match the shock body diameter, the overall length and the rate the suspension needs for the load. When the rate is too soft, the vehicle sags and the suspension can bottom out on rough ground. When it is too firm, the ride becomes harsh and the tires may lose contact on uneven terrain. Measuring the existing spring and the shock before buying helps narrow the choice.
Off-road use adds stress, so inspect the spring after hard trail runs. Look for scuffed coatings, rust at the coil ends and any change in height from one side to the other. Coil springs are often replaced alongside shocks and bump stops when a suspension is rebuilt, because worn parts change how the spring loads. Keep the spring seated correctly in its perch during reinstallation and recheck the fit after the first drive.
Specifications
| Brand | King Shocks |
|---|---|
| Part number | SPR3-14-150 |
| Size in title | 3 inches |
| Wire | Chrome silicon |
| Ends | Closed and ground |
| Origin | Made in the USA |
| Warranty | Lifetime, original purchaser, against sagging and breakage |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. Spring rate, length and body size must match the shock and the vehicle’s application.
Coil spring rate, length and body size all need to match the shock and the vehicle. Confirm the spring and shock combination with the manufacturer before ordering.
Installation notes
A coil spring that is the wrong rate or length for the shock can bottom out or fail early, so verify the spring’s fit on the shock body before installation. Coil springs under load should be handled with care and installed with the proper spring compressor.
The spring carries a lifetime warranty to the original purchaser against sagging and breakage. In the rare case of a failure, the spring is replaced without questions.
What’s included
One coil spring.








