Overview
The Pro Comp EXP55204, also written 55204, is a pair of rear coil springs for a 2.5-inch lift on the 2018–2026 Jeep Wrangler (JL) and the 2020 Jeep Gladiator. It is a direct fit for those models, and the set is sold in pairs in black.
Pro Comp has worked on suspension products for Jeeps for about two and a half decades. Its products are produced in San Diego, California.
The rear springs raise the back of the Jeep for a 2.5-inch lift. They are the rear counterpart to the front coil spring set, which is sold separately.
Key features
- Rear coil springs for a 2.5-inch lift
- Sold in pairs
- Black finish
- Direct fit to the listed Wrangler JL and Gladiator models
- Pro Comp offers a lifetime warranty on its products, per the brand
Choosing a rear spring setup
Rear coil springs set the height of the back of the vehicle, so they are usually fitted alongside a matching front set. When the front and rear heights differ, the vehicle can sit uneven and the steering geometry may change. Many owners replace the rear springs at the same time as the front coils, the shock absorbers and the brake lines, since those parts are affected by the new ride height.
Before buying, confirm that the springs are rated for the load the vehicle carries, including the rear bumper, spare tire and cargo. Heavy loads compress springs over time, so a worn or sagging spring is a common reason a rear end sits low again.
- Check that front and rear springs are from the same lift height
- Inspect shocks for wear after the new springs are fitted
- Re-check brake hose length at the new ride height
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXP55204 (55204) |
| Kit type | Rear coil spring set |
| Lift | 2.5 inch |
| Position | Rear |
| Quantity | Sold in pairs |
| Finish color | Black |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2020 Jeep Gladiator in the Launch Edition, Overland, Rubicon, Sport and Sport S trims, and the 2018–2026 Jeep Wrangler (JL) in both 2-door and 4-door configurations, including Unlimited Rubicon, Unlimited Sahara and Willys models.
The list covers the Wrangler JL and the 2020 Gladiator only, so earlier Wrangler generations such as the JK and TJ are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Rear springs change the rear ride height and the pinion angle, so the driveline angles should be checked after installation.
What’s included
The title and specifications describe a pair of rear coil springs for a 2.5-inch lift. The kit is for the rear only.





