Overview
The ARB 2889 is a medium load Old Man Emu coil spring for the Toyota Land Cruiser in base trim from 2009 to 2011 and from 2013 to 2016. It sits in the middle of the Land Cruiser load range, between the standard and heavy load coils.
Old Man Emu coils are tuned around the load each vehicle carries, with the goal of keeping handling controlled and the ride comfortable. The spring is chosen for the Land Cruiser’s load and the lift it gives follows from that choice.
Key features
- Medium load rating for a balanced setup
- It is a direct fit for the Land Cruiser base trim, 2009 to 2011 and 2013 to 2016.
- Designed for the specific make and model it is sold for
- Part number 2889 with UPC 9319092024520
Choosing a medium load coil
A medium load coil sits between a standard setup and a heavier rated spring, which suits a Land Cruiser that carries a moderate load on a regular basis. The rating affects how the front end holds its height under weight and how the ride feels over bumps. Choosing a rating that matches the usual load keeps the handling predictable without making the truck harsh when it is lightly loaded.
Once the new coils are fitted, watch how the truck settles over the next few weeks. Check the front shocks for leaks and inspect the bushings in the control arms, since changes in ride height can make worn parts more noticeable. Keeping a note of typical loads helps decide whether the rating still fits how the truck is used.
- Compare the rating with the load you usually carry
- Check front shocks for leaks after fitting
- Recheck alignment once the truck has settled
Specifications
| Brand | ARB 4×4 Accessories (Old Man Emu) |
|---|---|
| Part number | 2889 |
| UPC | 9319092024520 |
| Load rating | Medium load |
| Type | Coil spring |
Vehicle fitment
It fits the Toyota Land Cruiser in base trim for 2009 to 2011 and 2013 to 2016.
The 2012 Land Cruiser and years after 2016 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check ride height and alignment after the springs are installed, since the new coil changes the front geometry.



