Overview
The Baer Brakes D1303 is a set of front Claw ceramic brake pads for the Toyota Tundra, Toyota Sequoia, Toyota Land Cruiser and Lexus LX570. Each set has 4 pads and includes a mechanical pad wear sensor, pad shims and an attached wear indicator, making it a complete front brake pad kit for these Toyota and Lexus trucks and SUVs.
The Claw pad uses a premium high friction ceramic compound for consistent wear and performance. It offers long pad life, low rotor wear and minimal noise and dust. It balances stopping performance with comfortable everyday driving and breaks in quickly and easily.
Key features
- OE replacement front pads with consistent wear and performance
- Premium high friction ceramic compound
- Long pad life with low rotor wear
- Minimal noise and dust for daily driving
- Stainless steel abutment and anti-rattle hardware included with most pads
- Pad shims and a mechanical pad wear sensor included
- Slotted pad design with an attached wear indicator
- Quick and easy break-in
Ways to protect the brakes
Full-size Toyota and Lexus trucks and SUVs carry considerable weight, so front pads work hard under repeated stops, especially with a load or on long grades. Pad shims sit behind the pad to reduce vibration and noise, and they should be seated correctly during installation. Ceramic compounds tend to run quieter and cleaner than semi-metallic options, though they respond differently when cold.
A mechanical wear sensor gives an audible squeal when pad material runs low, which is a useful early warning on vehicles driven daily. Replace the sensor with the pads, since a worn sensor is not designed for reuse. Rotors should be measured and inspected at the same time, and slide pins should move freely before the new pads go in.
- Check rotors for scoring, heat spots and minimum thickness
- Clean the caliper bracket before fitting the new pads
- Replace pads on both sides of an axle together
- Listen for squeal or grinding after pad replacement
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | D1303 |
| FMSI number | D1303 |
| UPC | 844165051572 |
| Pads per set | 4 |
| Axle | Front |
| Friction material | Ceramic |
| Grade type | Premium |
| Backing plate color | Black |
| Slotted | Yes |
| Wear indicator attached | Yes |
| Pad wear sensor included | Yes |
| Pad wear sensor type | Mechanical |
| Pad shims included | Yes |
| Abutment clips included | Yes |
| Mounting hardware included | Yes |
| Brake lubricant included | No |
| Emission code | 6 |
| Country of origin | CN |
Vehicle fitment
It fits front brakes on the 2007–2021 Toyota Tundra, 2008–2022 Toyota Sequoia, 2008–2011 and 2013–2021 Toyota Land Cruiser, and 2008–2011 and 2013–2021 Lexus LX570.
The Land Cruiser and LX570 are covered for 2008–2011 and 2013–2021 model years. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The set includes stainless steel abutment clips, mounting hardware, pad shims and a mechanical pad wear sensor, so the sensor comes with the pad kit. Brake lubricant is not included, so have a suitable lubricant ready for the slide points and abutments. Brake work is best done by a qualified technician, and the pads break in quickly before normal use.
What’s included
Four front brake pads per set, with abutment clips, mounting hardware, pad shims and a mechanical pad wear sensor.
Not included: brake lubricant.
