Overview
The Rough Country 60-inch Premium Quad-Row Multi-Function LED Tailgate Light Strip (part number R/C78860) is a plug-in LED strip that installs in the gap between the tailgate and the bumper. It provides brake, running, reverse and turn signal lighting from one strip and fits selected Chevrolet, GMC, Ford, Jeep, Nissan and Toyota pickups and trucks.
The strip uses red and white LEDs on one unit: bright red brake lights, dim red running lights, white reverse lights, and half-panel turn signals. A flat 4-pin connector plugs into trailer hitch wiring, and 3M automotive-grade adhesive pads hold the strip in place. Its fitment covers full-size trucks, so check your tailgate and bumper gap before installing.
Key features
- Brake, running, reverse and turn signal functions on one strip
- Red and white LEDs with 156 LEDs per row and 624 LEDs total
- Plug-in 4-pin connector for trailer hitch wiring
- 3M automotive-grade adhesive pads included
- IP68 waterproof rating, resistant to dust and prolonged water immersion per the maker
- Installs into the recess between tailgate and bumper
- 3-year limited warranty from Rough Country
Installing a tailgate light strip
A tailgate strip is a visible, low-profile upgrade, but its adhesive and wiring decide how long it lasts. Clean and dry the mounting area thoroughly, since dust and wax keep adhesive pads from bonding. Press the strip firmly and allow time for the bond to set before the tailgate sees regular use.
Think about the wiring route before starting. The strip should sit in the recess without rubbing the bumper or tailgate seal, and the cable should be secured away from hinges and moving latches. If the reverse lights are spliced, use proper connectors and insulate each joint so moisture cannot reach the wire.
- Wipe the mounting surface with a clean solvent
- Route cable away from tailgate hinges
- Check the bumper gap after each season
Specifications
| Brand | Rough Country |
|---|---|
| Product line | Premium Quad-Row Multi-Function LED Tailgate Light Strip |
| Part number | R/C78860 |
| Size | 60 inch |
| LEDs | 156 per row, 624 total |
| Light colors | Red and white |
| Connector | Flat 4-pin plug-in adapter |
| Waterproof rating | IP68 |
| Mounting | 3M automotive-grade adhesive pads, pre-included |
| Warranty | 3-year limited |
Vehicle fitment
It fits 2003–2020 Chevrolet Silverado 1500, 2003–2019 Silverado 2500 HD, 2007–2019 Silverado 3500 HD, 2017–2019 Ford F-150 Raptor, 2003–2020 Ford F-250 and F-350 Super Duty, 2010–2020 GMC Sierra 1500, 2004–2019 GMC Sierra 2500 HD, 2007–2019 GMC Sierra 3500 HD, 2004 GMC Sierra 2500, 2007 GMC Sierra 1500 Classic, 2020–2021 Jeep Gladiator, 2005–2019 Nissan Frontier, 2004–2015 and 2017–2019 Nissan Titan, 2016–2019 Nissan Titan XD, and 2003–2019 Toyota Tundra. Trims vary by model, so confirm your trim before ordering.
This strip does not fit 18+ F-150 models, though the 2017–2019 F-150 Raptor is covered. Other F-150 models, Ram pickups, Chevrolet Colorado and GMC Canyon are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Reverse lights need splicing into the vehicle’s reverse wiring. The 4-pin plug handles the other functions through trailer hitch wiring, so confirm your harness is the flat 4-pin type. Check local rules on rear light colors and brightness before installing a multi-color strip on a road vehicle.
What’s included
One 60-inch Quad-Row Multi-Function LED tailgate light strip, the 4-pin plug-in adapter and the pre-included 3M automotive-grade adhesive pads.
Not included: Reverse-light splicing wire is not included, and reverse lighting requires splicing into the vehicle.















