Jeep Scrambler Suspension
78 suspension listed for the 1981–1985 Jeep Scrambler
Showing 25–48 of 78 resultsSorted by popularity
-
Leaf Spring Shackle Kit
Rugged Ridge Heavy-Duty Shackles – 18265.05
- Rugged Ridge 18265.05 heavy-duty steel front leaf spring shackles, sold as a pair
- Adds 1 inch of lift for listed Jeep CJ5, CJ7 and Scrambler models
- Non-greaseable design with no bushings included
- Bolt-on application with no drilling described
SKU: RUG18265.05 -
Shock Absorbers
Rancho RS5000X Series Shock Absorber – RS55113
- Fits many Chevrolet, GMC, Jeep, Ford, Toyota and Nissan models from 1943 to 2011 per the manufacturer fitment list
- Rear position, direct fit, gas charged
- Part number RS55113, UPC 10039703006290
- Lift height w/0 in. Lift/Drop
SKU: RANRS55113 -
-
Leaf Spring Hanger
Omix-ADA Front Frame Shackle Hanger – 18271.04
- Omix-ADA 18271.04 front frame shackle hanger, a direct OE replacement for Jeep CJ5, CJ7 and Scrambler models
- Listed fitment: 1976-1983 Jeep CJ5, 1976-1986 Jeep CJ7 and 1981-1985 Jeep Scrambler
- Built to original Jeep specifications by Omix-ADA
- Limited five year warranty on this front hanger
- Part number 18271.04, UPC 804314034757
SKU: OAI18271.04 -
Leaf Spring Hanger
Omix-ADA Rear Frame Shackle Hanger – 18271.03
- Omix-Ada rear frame shackle hanger, part number 18271.03
- Direct OE replacement built to original specifications
- Fits 1976-1983 Jeep CJ5, 1976-1986 Jeep CJ7 and 1981-1985 Jeep Scrambler
- UPC 804314034566
- Limited five year manufacturers warranty
SKU: OAI18271.03 -
-
Leaf Spring
Omix-ADA Rear Replacement Leaf Spring – 18202.11
- Fits Jeep CJ5 1976–1983, CJ7 1976–1986 and Scrambler 1981–1985 per the manufacturer fitment list
- Omix-ADA rear replacement leaf spring, part number 18202.11, six leaves
- Single spring stack; replacing both rear sides takes two
- Direct replacement for stock height; bushings not included
- Limited five-year manufacturer warranty
SKU: OAI18202.11 -
-
Frame Stiffener
Mountain Off Road Enterprises Front Frame Reinforcing Plates – FP300
- Front frame reinforcing plates, two piece set, part number FP300
- Listed fitment: 1976–1983 Jeep CJ5, 1976–1986 CJ7, 1981–1985 Scrambler
- 5 feet long, bare steel
- Brand: Mountain Off Road Enterprises; UPC 70000503419
SKU: MREFP300 -
Leaf Spring Shackle Kit
Mountain Off Road Enterprises Greaseable Shackles – LS9035
- Mountain Off Road LS9035 front greaseable shackles for 1976-1983 CJ5, 1976-1986 CJ7 and 1981-1985 Scrambler
- Cut from 3/8 inch thick steel plate with a thick walled center brace
- Grade 5 hardware and zinc plated gold finish
- Front location only
SKU: MRELS9035 -
Leaf Spring Shackle Kit
Mountain Off Road Enterprises Greaseable Shackles – LS9034
- Mountain Off Road LS9034 rear greaseable shackles for 1976-1983 CJ5, 1976-1986 CJ7 and 1981-1985 Scrambler
- Cut from 3/8 inch thick steel plate with grade 5 hardware
- Rear location only
- Zinc plated gold finish
SKU: MRELS9034 -
-
Strut Rods
Kentrol Strut Rod Kit – 30517
- Kentrol 30517 stainless steel strut rod kit that replaces factory steel rods
- Made of 304 stainless steel with stainless steel hardware
- Fitment list: 1976–1986 Jeep CJ7, 1976–1983 CJ5 and 1981–1985 Scrambler
- Occasional waxing recommended to keep the finish bright
SKU: KEN30517 -
Lift Kits
Pro Comp 4 Inch Lift Kit with ES3000 Shocks – K3064
- 4-inch stage 1 leaf spring lift with pitman arm steering correction
- Extended length brake lines and ES3000 front and rear shocks
- Fits Jeep CJ5, CJ7 and Scrambler models from 1981 to 1986
- Max tire size 33×12.50 with 15 to 20-inch wheels, 8 to 10-inch width
SKU: EXPK3064 -
Lift Kits
Pro Comp 2.5 Inch Lift Kit with ES3000 Shocks – K3063
- 2.5-inch stage 1 leaf spring lift with ES3000 front and rear shocks
- Fits Jeep CJ5, CJ7 and Scrambler models from 1981 to 1986
- Wheel size range 15 to 20 inches, wheel width 8 to 12 inches
- Min-max backspace 3.25 to 4.5 inches, max tire size 33×12.50
SKU: EXPK3063 -
-
-
Leaf Spring Shackle Bushing
Energy Suspension Shackle Bushing Set (Red) – 2.2106R
- Red polyurethane rear shackle bushing set, part number 2.2106R
- Fits rear leaf springs with stock shackles
- Fits 1976–1983 Jeep CJ5, 1976–1986 Jeep CJ7 and 1981–1985 Jeep Scrambler
- Non-greaseable service with no grease fitting
SKU: ENE2.2106R -
Shackle Reversal Kits
Daystar 0.75 Inch Lift Greaseable Super Shackles – KJ61021BK
- Daystar KJ61021BK greaseable super shackles for a 0.75 inch (3/4 inch) front lift
- Fits 1976–1983 Jeep CJ5, 1976–1986 CJ7 and 1981–1985 Jeep Scrambler
- Includes replacement bushings, sleeves and gun-drilled bolts with a grease zerk
- Zinc-plated black finish, come in pairs
SKU: DAYKJ61021BK -
Shackle Reversal Kits
Daystar 0.75 Inch Lift Greaseable Super Shackles – KJ61018BK
- Daystar KJ61018BK rear Super Shackles for 1976–1983 Jeep CJ5, 1976–1986 CJ7 and 1981–1985 Jeep Scrambler
- 0.75 inch (3/4 inch) lift, rear position, greasable
- Includes replacement bushings, sleeves and gun-drilled bolts
- Zinc plated, sold in pairs, UPC 814423014977
SKU: DAYKJ61018BK -
Shackle Reversal Kits
Daystar 1.5 Inch Lift Greasable Super Shackles – KJ61007BK
- Rear position, 1.5 inch (1-1/2 inch) lift
- Fits 1976–1983 Jeep CJ5, 1976–1986 CJ7 and 1981–1985 Jeep Scrambler
- Greasable with black polyurethane bushings and rifle drilled bolts
- Zinc plated, sold as a pair, limited lifetime warranty
SKU: DAYKJ61007BK -
Shackle Reversal Kits
Daystar 0.5 Inch Lift Greasable Super Shackles – KJ61004BK
- Fits 1976–1983 Jeep CJ5, 1976–1986 CJ7 and 1981–1985 Jeep Scrambler
- 0.5 inch (1/2 inch) front lift, sold as a pair
- Greasable with black polyurethane bushings and rifle drilled bolts
- Zinc plated finish and limited lifetime warranty
SKU: DAYKJ61004BK -
Shackle Reversal Kits
Daystar 2.25 Inch Lift Non-Greaseable Super Shackles – KJ60009
- Daystar KJ60009 non-greaseable rear super shackle with 2.25 inch lift, sold in pairs
- Keeps the factory bushings; no hardware included
- Zinc-plated finish
- Fits 1976–1983 Jeep CJ5, 1976–1986 Jeep CJ7 and 1981–1985 Jeep Scrambler
SKU: DAYKJ60009
