Overview
The Power Stop Z26 Street Warrior 1-Click Brake Kit K1482-26 is a front drilled and slotted rotor and pad kit, without calipers, for Chevrolet S10, S10 Blazer and El Camino and GMC Jimmy, S15 Jimmy, Caballero and Sonoma models from 1982 to 1995.
The Z26 pads are a carbon fiber and ceramic hybrid designed to resist fade up to 1500 degrees. Evolution Tru-Cast rotors have beveled drill holes and rounded slots to help clear gas, water and dust. The pads offer a higher friction coefficient than OE pads and are chamfered and slotted like OE pads. Stainless steel shims are fitted for noise insulation, and the pad surfaces are thermal scorched for faster break-in. The kit suits high-horsepower vehicles and larger wheel upgrades. Calipers are not included, so the existing ones are reused.
Key features
- Front position, without calipers
- Evolution drilled and slotted performance rotors
- Z26 extreme street performance carbon-ceramic pads
- Rotors silver zinc plated to resist rust, except hub and rotor assemblies
- Stainless steel shims for noise insulation
- Powder coated backing plate
- Premium stainless steel hardware, pin bushing kit and hi-temp lubricant
Caliper reuse and break-in
Because this kit comes without calipers, the existing units carry the work. Before installing, check that the calipers move freely, that the piston seals are intact and that the slide pins are clean and lubricated. A caliper that drags will overheat the new rotor and pad, so repair or rebuild any unit that is sticking. Flushing old, moisture-laden fluid at the same time helps keep the system responding evenly.
Break-in matters for this pad type. Make a series of moderate stops from a moderate speed so the pad and rotor surfaces develop a matching layer. Avoid holding the brakes firmly at a stop right after installation. Allow the brakes to cool between sessions and watch pedal feel during the first drives. Carbon-ceramic compounds can feel firm at first, so give them time to settle before judging them.
Specifications
| Brand | Power Stop |
|---|---|
| Part number | K1482-26 |
| UPC | 700007468571 |
| Product type | Front brake kit, without calipers |
| Rotors | Evolution Tru-Cast drilled and slotted |
| Rotor plating | Silver zinc, except hub and rotor assemblies |
| Pads | Z26 carbon fiber and ceramic hybrid |
| Pad fade resistance | Up to 1500 degrees |
| Position | Front |
| Fit type | Direct fit |
Vehicle fitment
It fits the 1982–1987 Chevrolet El Camino, 1986–1995 Chevrolet S10, 1983–1994 Chevrolet S10 Blazer, 1982–1987 GMC Caballero, 1983–1984 and 1992–1994 GMC Jimmy, 1983–1990 GMC S15 Jimmy and 1991–1995 GMC Sonoma.
The kit is for the front axle only and does not include calipers. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The existing calipers are reused, since the kit comes without them. The pad surfaces are thermal scorched for a quicker break-in.
What’s included
Rotors, Z26 pads, stainless steel hardware (where applicable), a pin bushing kit (where applicable) and hi-temp lubricant.
Not included: Calipers.









