Select your vehicle

Power Stop Z36 Truck & Tow Front Brake Kit – K1860-36

Power Stop

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Front kit for Explorer, Ranger, Mazda B3000 and B4000 and Mountaineer
  • 2-wheel set of slotted and cross-drilled rotors with ceramic pads
  • Matched for heat and brake torque
  • Direct fit

Description

Overview

The Power Stop K1860-36 is a Z36 Truck & Tow performance front brake kit for the 1995–2001 Ford Explorer, 1995–2000 Explorer Sport, 1998–2002 Ford Ranger, 1998–2002 Mazda B3000 and B4000 and 1997–2001 Mercury Mountaineer.

Heavy loads, trailers and larger wheel and tire combinations change the conditions the stock brakes work in, and those conditions can exceed what the stock parts handle. The kit’s matched parts are built for the extra heat and brake torque that towing, hauling and off-road use create.

The kit’s matched slotted and cross-drilled rotors are meant to reduce heat, and the Z36 Extreme Truck & Tow ceramic pads provide the added brake torque to stop a hauler quickly. It covers the front axle as a 2-wheel set.

Key features

  • Front kit supplied as a 2-wheel set
  • Slotted and cross-drilled cast iron rotors
  • Coated rotors
  • Ceramic pads from the Z36 Extreme Truck & Tow range
  • Matched components for added heat and torque
  • Direct-fit design

Front brake service tips

Front brakes carry most of the stopping force on a light truck or SUV, so they wear faster than the rear when a vehicle is loaded. Pad wear shows at the inspection points, and a pulse through the pedal can point to a rotor that is warped or unevenly worn. Measure rotor thickness when pads are changed.

Replacing the front rotors and pads together keeps braking even from side to side. Clean the hub face and check the caliper slide pins for free movement. A sticking pin can wear one pad faster and pull the vehicle to one side under braking.

  • Check caliper slide pins during pad changes
  • Clean the hub face before fitting new rotors
  • Replace rubber brake hoses that show cracks

Specifications

Brand Power Stop
Part number K1860-36
Series Z26 Street Warrior Brake Kit
Axle position Front
Rotor type Slotted and cross-drilled
Rotor material Cast iron
Rotor coating Coated
Pad material Ceramic
Fit type Direct fit
Quantity 2-wheel set

Vehicle fitment

It fits the 1995–2001 Ford Explorer, the 1995–2000 Ford Explorer Sport, the 1998–2002 Ford Ranger, the 1998–2002 Mazda B3000 and B4000, and the 1997–2001 Mercury Mountaineer.

Rangers built before 1998 and Mazda B-Series trucks outside 1998–2002 are not on this list, and the rear brakes are not part of this kit. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

This front kit replaces the rotors and pads on one axle only, and the rotors and pads are matched, so they are intended to be installed together, and the rear brakes keep their existing parts.

What’s included

  • Two slotted and cross-drilled coated cast iron rotors (front)
  • Ceramic Z36 Truck & Tow brake pads for the front axle

Not included: Rear brake parts, calipers and any parts not named for this kit.

Fitment

VehicleYearsTrims
Ford Explorer1995–2001Eddie Bauer, Expedition, Limited, Postal, XL, XL Fleet, XLS, XLT
Ford Explorer Sport1995–2000All
Ford Ranger1998–2002Edge, Splash, XL, XLT
Mazda B30001998–2002Base, SE, SX
Mazda B40001998–2002Base, SE, Troy Lee
Mercury Mountaineer1997–2001Base

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the Power Stop K1860-36 fit a Ford Ranger?

Yes, for 1998–2002. The Ford Ranger fits in those model years, and the kit also fits the Explorer, Explorer Sport, Mazda B3000 and B4000 and Mercury Mountaineer. Check your year, model and trim before ordering.

Is the K1860-36 a front-only kit?

Yes. It is a front-only kit sold as a 2-wheel set, so it replaces the front rotors and pads and leaves the rear brakes as they are.

Why does adding weight matter for brakes?

Power Stop says hauling, towing or fitting larger wheels and tires changes the stock brake's operating conditions, which can exceed the stock parts. The K1860-36's matched parts address that heat and torque.

Will the K1860-36 fit a Mazda B4000?

Yes, for 1998–2002. The Mazda B4000 fits in those model years, and the B3000 is covered for the same years. A B4000 from another year needs a different part, so confirm your model year before ordering.

Do front rotors need replacing whenever the pads are changed?

Not always. Measure rotor thickness, check for scoring and test for runout at each pad change. Replace a rotor that is grooved or below minimum thickness, since it can shorten the life of new pads.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon