Overview
The Power Stop Z36 Truck & Tow front and rear brake upgrade kit PSTK15095DK-36 (K15095DK-36) is a pad and rotor kit for the 1995-2000 Toyota 4Runner in Base, Limited and SR5 versions. One kit supplies parts for both axles.
Power Stop positions the Z36 line for trucks, 4x4s and SUVs that work hard and play hard, from towing to a rough Moab trail. The ceramic pads are reinforced with carbon fibers for low dust, and the drilled, slotted, zinc-plated rotors are meant to hold brake temperatures down on long descents.
The kit is meant for 4Runner owners who tow, carry heavy gear or run bigger tires and want more from the brakes than the stock parts give.
Key features
- Front and rear brake kit for the Toyota 4Runner
- Low-dust ceramic pads with carbon fibers
- Drilled, slotted and zinc-plated rotors
- Premium stainless steel hardware
- Easy bolt-on installation
Brake use on a 4Runner
A 4Runner that carries gear or pulls a trailer puts extra demand on its brakes, especially on long downhill grades. Brake pads that resist dust help keep the wheels clean, but they still need regular checks. Rotor condition matters as well, since a warped or scored rotor can cause pulsing under braking.
Bigger tires and a heavier load both increase the energy the brakes must absorb. Allow more following distance when the vehicle is loaded, and avoid riding the pedal on descents. Keep the brake fluid fresh, as moisture lowers its boiling point.
Pads and rotors wear together, so replacing both at the same time keeps braking even. Check the rear hardware when the pads are changed.
- Check pad thickness at each rotation
- Look for scoring or heat marks on rotors
- Inspect brake fluid before long trips
Specifications
| Brand | Power Stop |
|---|---|
| Part number | PSTK15095DK-36 |
| Series | Z36 Truck & Tow |
| Axles covered | Front and rear |
| Pad material | Ceramic with carbon fibers |
| Rotor design | Drilled, slotted and zinc-plated |
| Hardware | Stainless steel |
| Fit type | Direct fit |
Vehicle fitment
It fits the 1995-2000 Toyota 4Runner in Base, Limited and SR5 versions, covering model years 1995 through 2000.
Other 4Runner generations are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The kit is a bolt-on installation and includes stainless steel hardware for the mounting.
What’s included
Brake pads and rotors for the front and rear axles, with stainless steel hardware.









