Overview
The Power Stop K3035-36 is a Z36 Severe-Duty Truck & Tow front brake kit for the 2006–2010 Hummer H3 and the 2009–2010 Hummer H3T, pairing ceramic pads with drilled, slotted and zinc-plated rotors.
The Z36 Truck & Tow Brake Upgrade Kit is built for trucks, 4x4s and SUVs used for towing a boat or trailer, hauling on a jobsite or tackling a tough trail. The drilled, slotted and zinc-plated rotors help keep brake temperatures down on long mountain descents, and the low-dust ceramic pads are reinforced with carbon fibers.
Key features
- Front pad and rotor kit
- Low-dust ceramic pads reinforced with carbon fibers
- Drilled, slotted and zinc-plated rotors
- Premium stainless steel hardware included
- Easy, bolt-on installation
- Built for towing, hauling and trail use
Front brakes under heavy loads
Front brakes do most of the work when a heavy vehicle slows down, so the front rotors and pads often reach higher temperatures than the rears. Drilled and slotted rotors give gases and dust a route out from under the pad, which helps the surface shed heat and debris. Ceramic pads are a common choice for mixed highway and trail use because they run cleanly and quietly.
When renewing a front axle, pads, rotors and hardware are usually changed together so the surfaces wear evenly. Check the caliper slide pins and the brake hose condition at the same time, since a sticking caliper can overheat one side. Bed in the new pads before towing, and allow the rotors to cool between hard stops.
- Replace front pads and rotors as a set
- Inspect caliper slides for free movement
- Check brake hoses for cracking or swelling
Specifications
| Brand | Power Stop |
|---|---|
| Part number | K3035-36 |
| Series | Z36 Severe-Duty Truck & Tow |
| Axle position | Front |
| Fit type | Direct fit |
| Pad formula | Ceramic reinforced with carbon fibers |
| Rotor design | Drilled and slotted, zinc-plated |
| Hardware | Premium stainless steel |
Vehicle fitment
It fits the 2006-2010 Hummer H3 and the 2009-2010 Hummer H3T as a front kit.
It is a front-axle kit only, so Hummer rear brakes need a separate part. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Premium stainless steel hardware comes in the kit for a bolt-on installation, so the front rotors, pads and hardware can all be renewed in one job.
What’s included
- Front drilled, slotted and zinc-plated rotors
- Z36 ceramic brake pads with carbon fibers
- Premium stainless steel hardware
Not included: Calipers and rear brake parts.









