Select your vehicle

Power Stop Autospecialty OE Solid Rear Brake Rotor – AR8743

Power Stop

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Solid rear OE-style brake rotor for the 1999-2004 Jeep Grand Cherokee (WJ)
  • Smooth surface for shorter pad break-in; mill balanced
  • Low dust, quiet operation and long pad life
  • Power Stop part number PSTAR8743

Description

Overview

The Power Stop Autospecialty AR8743 is a solid rear brake rotor for the 1999-2004 Jeep Grand Cherokee WJ. It is an OE-style replacement rotor made for drivers who want quiet operation and long pad life rather than aggressive performance driving.

The rotor has a smooth surface finish that shortens pad break-in, is mill balanced, and has castings with extractor and set screw holes where the vehicle requires them. Power Stop was founded in 1997 in Southern California and designs parts to match each vehicle’s tolerances.

The OE replacement design is built for strong stopping power, low-dust operation and quiet braking. The extractor and set screw holes are present only where the vehicle needs them. As a solid rear disc, the AR8743 is made for the Grand Cherokee WJ rear axle.

Key features

  • Solid rear rotor, OE-style replacement
  • Smooth surface finish, which Power Stop says shortens pad break-in
  • Detailed castings with extractor and set screw holes where required
  • Mill balanced
  • Low dust and long pad life
  • Built to resist warping and cracking.
  • Suited to non-aggressive driving

Pads, bedding and rotor care

A solid rear rotor works best when the pads and rotor are matched and bedded in together. A smooth surface helps the pad settle quickly, but the friction layer still needs an even transfer. Make a series of moderate stops from moderate speed after installation, then let the brakes cool before heavy use.

Keep the rotor and hub face clean when fitting. Rust, grease or old pad material on the mounting surface can cause runout and pulsation. Clean the hub face and check that the rotor sits flat before the wheel is tightened. Inspect the rotor for cracks, deep scoring or thin spots at each pad change.

  • Clean the hub face and rotor mounting surface
  • Bed new pads with moderate stops
  • Check the rotor for cracks or deep scoring
  • Tighten wheel fasteners evenly

Specifications

Brand Power Stop
Part number PSTAR8743
Part type Brake rotor (Autospecialty OE)
Style Solid
Position Rear
Fit type Direct fit

Vehicle fitment

It fits the 1999-2004 Jeep Grand Cherokee (WJ).

The ZJ before it and the WK after it are different Grand Cherokees that this rotor does not cover, and it fits the rear only. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Rotors with extractor and set screw holes make removal easier where those features apply. Fit new pads at the same time and bed them in, since a smooth rotor surface shortens break-in.

What’s included

Rear brake rotor.

Not included: Brake pads and other hardware are not included.

Fitment

VehicleYearsTrims
Jeep Grand Cherokee (WJ)1999–2004Laredo, Limited, Overland, Special Edition, Sport

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Which Grand Cherokee does the Power Stop AR8743 fit?

It fits the 1999-2004 Jeep Grand Cherokee (WJ). It is a solid rotor for the rear position, so front rotors for the same vehicle are a different part and are not covered by this one.

Is the AR8743 rotor solid or vented?

It is a solid rotor, and the position is rear. Front rotors for the same vehicle are a different part.

Is the AR8743 a performance rotor?

No. It is an OE-style replacement that suits non-aggressive driving, rather than a performance rotor, with low dust, quiet operation and long pad life.

Why does the AR8743 have set screw holes?

Power Stop says its castings include extractor and set screw holes where required, which helps with installation on vehicles that use them.

How should new pads be bedded in with this rotor?

Make several moderate stops from moderate speed to transfer an even layer of pad material to the rotor, then let the brakes cool. Avoid heavy stops until the pads have settled, and keep the surface clean of grease.

What causes brake pulsation with a new rotor?

Uneven pad transfer, rust on the hub face, or loose wheel fasteners are common causes. Clean the mounting surface, tighten the fasteners evenly and check the rotor before testing the brakes.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon