Overview
The Crown Automotive Yoke Kit, part number D300YOKEUBK, is a driveline kit that includes a yoke, U-bolts with washers and nuts, an oil seal, a pinion washer and a pinion nut.
Match the yoke and pinion on your axle to the kit before ordering.
Key features
- Includes yoke with U-bolts, washers and nuts
- Oil seal, pinion washer and pinion nut included
- Listed with a direct fit note
- Crown Automotive brand kit
Yoke and pinion fitting
A yoke clamps onto the pinion spline, so fit depends on the spline count, pinion nut and the shaft it mates with. Before tightening, check that the yoke slides on cleanly and that the pinion nut has the correct thread. Forcing a yoke onto a pinion can damage the spline and seat it crooked.
The oil seal rides on the yoke surface, so a scored or rusty yoke will leak even with a new seal. Clean the sealing surface and inspect it for grooves before installing. U-bolts should be tightened evenly and rechecked after the first drives, since they settle as the yoke seats.
- Clean the yoke sealing surface before installation
- Use the pinion washer in the order the kit intends
- Recheck U-bolt torque after the initial drives
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | D300YOKEUBK |
| UPC | 848399078879 |
| Included | Yoke, U-bolts with washers and nuts, oil seal, pinion washer, pinion nut |
| Fitment listed | Direct fit, no vehicles named |
Vehicle fitment
The kit is a direct fit part, so check the yoke and pinion on your axle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The kit includes the yoke, U-bolts with washers and nuts, an oil seal, a pinion washer and a pinion nut. No other items are named.









