Overview
The Pro Comp Suspension U-bolt, part number 13-90510A, is a 9/16-inch by 18 semi-round U-bolt sized at 3.125 by 9.25 inches. It is listed with hardware and is intended for clamping an axle or spring to a mounting plate.
These U-bolts are made from low-alloy, high-strength steel equivalent to a Grade 5 bolt, with a clear zinc plated finish. No vehicle is named, so confirm the U-bolt size against your axle and plate before buying.
Key features
- Semi-round shape
- Low-alloy, high-strength steel
- Equivalent to a Grade 5 bolt
- Clear zinc plated for longevity
Mounting plate and axle fit
Semi-round U-bolts tend to sit flatter against a mounting surface than round ones, which can help where clearance is limited. The bend must match the axle or spring diameter so both legs bear evenly on the plate. A poor match can crush the threads or put the clamp under uneven load.
Grade 5 equivalent steel is a common choice for clamp applications where the nut must hold a steady preload. Zinc plating protects the threads from rust, but it wears at contact points, so check the finish when reinstalling. Many installers replace the nuts whenever a U-bolt is removed, since reused nuts may not hold torque.
- Clean rust from threads before fitting
- Check both legs sit flat against the plate
- Re-check nut tightness after the first drive
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 13-90510A |
| UPC | 614901108132 |
| Size | 9/16 inch by 18 |
| Dimensions | 3.125 in x 9.25 in |
| Shape | Semi-round |
| Material | Low-alloy, high-strength steel (Grade 5 equivalent) |
| Finish | Clear zinc plated |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. Check the bolt size and bend against the axle or spring it will clamp.
What’s included
Hardware is supplied with the U-bolt. Check the nut and washer count against your installation before starting.





