Overview
The Pro Comp 13-90087A is a square U-bolt with a 9/16 in -18 thread. It measures 2 5/8 in by 12.5 in and has a plain finish.
It comes packaged with hardware, and the thread and length are what to check against your axle and spring.
Key features
- Square profile
- 9/16 in -18 thread
- Plain finish
- Packaged with hardware
Choosing the right U-bolt
Square U-bolts have corners rather than a round bend, which can change how they sit against flat axle pads and spring plates. When choosing one, confirm that the bend clears the axle tube and that the square profile seats flat against the pad rather than bearing on a single corner.
A plain finish leaves the steel exposed, so moisture and road salt can start rust sooner than on a coated part. Wipe the U-bolt dry after wet trail use, inspect the corners and threads for pitting, and replace it if the threads are damaged. Nuts, plates and washers are often replaced at the same time.
Before tightening, make sure the spring pad and axle surface are clean so the clamp pulls evenly. Re-check the torque after the first drives on a new installation.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 13-90087A |
| UPC | 614901010060 |
| Profile | Square |
| Thread | 9/16 in -18 |
| Size | 2 5/8 in x 12.5 in |
| Finish | Plain |
| Hardware | Included |
Vehicle fitment
Square U-bolts clamp against a flat spring seat, so check the 2 5/8 in by 12.5 in length and the 9/16 in -18 thread against your axle and spring. Before ordering, confirm the fit against your vehicle’s year, model and trim.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One packaged square U-bolt with hardware, part number 13-90087A.








