Overview
The Tuff Country 27851 is a zinc plated rear axle U-bolt for Ford F-250 and F-350 pickups from 1980 to 1997. It is designed for add-a-leaf setups and is a rear position part.
The list covers the 1980–1996 F-250 in the Base, Custom, Eddie Bauer, Ranger, Ranger Lariat, Ranger XLT, Special, XL, XLS, XLT and XLT Lariat trims, the 1997 F-250 HD in the XL and XLT trims, and the 1980–1997 F-350 in the same trim families.
Key features
- Zinc plated U-bolt
- Rear axle position
- Designed for add-a-leaf setups
- Direct fit for the listed trucks
- Tuff Country part number T/C27851
Add-a-leaf setups explained
An add-a-leaf setup adds a leaf to the rear spring to increase load capacity, and the U-bolts must be matched to that spring arrangement. The leaf stack changes the height and the clamping position, so the U-bolt has to seat correctly against the spring and axle. Mismatched parts can allow the spring to shift under load.
When fitting new U-bolts to a truck with an add-a-leaf spring, check that every leaf sits flat and that the spring pad is seated before the nuts are tightened. Recheck the clamp after the first few drives, since the spring settles as the parts bed in. A clamp that loosens over time is a sign to inspect the spring and the U-bolt together.
- Confirm the spring pack is the add-a-leaf type
- Seat the leaves and spring pad before tightening
- Inspect for shifting or movement at the axle
- Replace worn spring hardware as a set
Specifications
| Brand | Tuff Country |
|---|---|
| Part number | T/C27851 |
| Type | Axle U-bolt |
| Finish | Zinc plated |
| Position | Rear |
| Use | Add-a-leaf |
| Fitment | Direct fit |
Vehicle fitment
It fits the 1980–1996 Ford F-250 in the trims covered, the 1980–1997 Ford F-350 in the same trim families, and the 1997 Ford F-250 HD in its XL and XLT trims.
Model years before 1980 and the 1998 and later trucks are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the leaf spring and axle for correct seating after the U-bolt is fitted, since this U-bolt is used with add-a-leaf setups.









