Overview
The Crown Automotive J0999546 is a U-bolt for Jeep axle assemblies, carried under part number J0999546 and UPC 70000682727. It is a direct fit replacement, but no particular year, model or trim is tied to it.
Crown says its catalog covers Jeep vehicles from 1942 onward, with over 8,000 parts, and that it holds many factory-discontinued pieces. That is the brand’s own description and does not replace fitment confirmation for this U-bolt.
Key features
- Replacement U-bolt for Jeep axle assemblies
- Labeled direct fit by the manufacturer
- Identified by part number J0999546 and UPC 70000682727
- Brand catalog covers Jeep vehicles from 1942 onward
Before fitting a replacement U-bolt
The U-bolt is the clamp that pins the leaf springs to the axle, so it has to match the axle tube and spring pack. Measure the tube and spring thickness, then compare the thread length and bend against the old part. Factory-discontinued pieces can differ in small ways, so a side-by-side check avoids surprises.
Replacing the nuts and checking the spring pads is good practice whenever a U-bolt changes. Clean the threads, apply torque in a crisscross order, and recheck after a short drive. Look for cracks at the bends and shiny wear at the axle seat, which signal that the clamp was loose.
- Measure axle tube and spring thickness
- Compare thread length and bend
- Replace nuts and inspect spring pads
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J0999546 |
| UPC | 70000682727 |
| Fit type | Direct fit (manufacturer label) |
Vehicle fitment
No year, model or trim is tied to this U-bolt. Check the axle and model against your vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Verify nuts, washers and plates against your installation before starting.









