Overview
The Pro Comp 13-90290A is a single round U-bolt, sized 5/8 in by 3.550 in by 17.50 in. It is supplied with two nylock tall nuts and two thick flat washers.
A single U-bolt is one half of a pair, so count how many your axle or spring setup needs before fitting.
Key features
- Round profile
- Two nylock tall nuts
- Two thick flat washers
Before you buy
A U-bolt works with a clamp plate or spring seat to hold the axle against the spring. Because each bolt covers only one side of the axle, the number needed depends on the axle and the plate layout. Lay out the parts before installing so the bends face the correct direction and the legs line up with the plate holes. Replace any U-bolt that shows bends, cracks or stretched threads.
Nylock tall nuts have a nylon insert that resists loosening from vibration, which suits a suspension clamp that sees constant movement. Thick flat washers spread the load across the plate and help protect its surface. Tighten the nuts evenly in a cross pattern and recheck them after the first drives.
- Count the U-bolts needed for each axle before ordering
- Check that the plate holes match the leg spacing
- Use new nylock nuts if the old ones spin freely
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 13-90290A |
| UPC | 614901125740 |
| Profile | Round |
| Size | 5/8 in x 3.550 in x 17.50 in |
| Hardware | Two nylock tall nuts, two thick flat washers |
Vehicle fitment
Before ordering, make sure your vehicle’s year, model and trim match the setup. Measure the axle and spring so the 5/8 in by 3.550 in by 17.50 in size clamps the spring correctly.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One U-bolt, two nylock tall nuts and two thick flat washers.








