Overview
The Tuff Country SX8000 front shock absorber, part number 69101, is a twin-tube, nitrogen gas charged shock with a heavy duty 5/8 inch piston rod and polyurethane bushings. It is set up for a 2 in. lift and is intended for older Jeep CJ and Scrambler models.
Nitrogen gas pressure is meant to reduce fade and give quicker shock response. The heavy duty rod and polyurethane bushings are part of the design. Fitment is limited to older Jeep CJ and Scrambler models, so check your vehicle before choosing it.
Key features
- Twin-tube design with nitrogen gas charge
- Nitrogen gas pressure reduces fade and gives quicker shock response
- Heavy duty 5/8 inch piston rod
- Polyurethane bushings
- Set up for a 2 in. lift
- Direct fit in the front position
Older Jeep shocks and nitrogen charge
Older Jeep CJ and Scrambler models were built with simpler suspensions, so front shocks on these vehicles see different loads than on modern SUVs. A shock designed for this type of vehicle needs to match the lift height and the mounting points on the axle. Check the eye and stud positions before ordering, because older brackets can differ from later ones.
Nitrogen gas charged shocks are often chosen to help maintain damping over repeated use, since the gas stays stable as the oil warms. Piston rods take wear from road debris and dust, so check the rod for pitting or bends and clean it when the vehicle is serviced. Inspect the rubber bushings for cracks and replace them if they feel loose or stiff.
- Check the rod for pitting or bends
- Inspect the bushings during service
- Match the front position before installing
Specifications
| Brand | Tuff Country |
|---|---|
| Part number | 69101 |
| UPC | 698815691010 |
| Shock series | SX8000 Series |
| Position | Front |
| Fitment type | Direct fit |
| Lift height | 2 in. lift |
| Gas charge | Nitrogen (gas charged) |
| Piston rod | 5/8 inch, heavy duty |
| Bushings | Polyurethane |
Vehicle fitment
Manufacturer fitment covers 1976–1983 Jeep CJ5 (Base, Golden Eagle, Laredo, Limited, Renegade), 1976–1986 Jeep CJ7 (Base, Golden Eagle, Golden Hawk, Laredo, Limited, Renegade) and 1981–1985 Jeep Scrambler (Base, Laredo, Renegade, SL, SR).
Jeep Wrangler, Cherokee and full-size pickup models are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Confirm that the 2 in. lift setting suits your suspension before fitting, because the shock is built for that height.
What’s included
One front shock absorber per unit. Check the package contents against your installation before fitting.








