Overview
The Pro Comp ZX2086 is a front Pro Runner monotube shock absorber for the Jeep CJ5 (1976–1983) and CJ7 (1976–1986). It is designed for a vehicle with a 3 to 4 inch lift, which is the range where the CJ’s front suspension needs longer shock travel than stock.
The shock uses a gas charged monotube body. The nitrogen charge helps prevent cavitation during compression and rebound, and the monotube sheds heat faster than a conventional twin tube. Multi-stage valving is set for the application, and the body has a zinc plated, clear coated finish.
The shock is sized for a suspension with 3 to 4 inches of lift. A monotube places the oil and nitrogen gas in one tube with a floating piston, which keeps the oil under pressure during compression and rebound. It is a front position unit with multi-stage valving, and it fits the CJ5 and CJ7 years below.
Key features
- Front position, direct fit
- Designed for 3 to 4 inches of lift
- Gas charged monotube with nitrogen pressurization
- Multi-stage valving
- Zinc plated, clear coated finish
Working with a lifted CJ
A lifted CJ needs longer shock travel than stock, so the shock’s extended length matters as much as its damping. As the front suspension extends, the shock limits droop and helps keep the axle controlled. Matching the shock to the lift height keeps the suspension from reaching the end of its travel too early.
A lift can change steering geometry, brake hose length and the angle the shock works at. After installation, check the brake hoses at full droop, the steering linkage clearance and the shock mounts for rubbing. Use bump stops if they are fitted, and inspect them along with the shock whenever the suspension is serviced. Recheck fasteners after the first off-road trip.
- Check brake hoses at full droop
- Inspect steering linkage clearance
- Recheck mounts after the first trip
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | ZX2086 |
| UPC | 614901094947 |
| Shock series | Pro Runner |
| Position | Front |
| Lift height | 3 to 4 in. |
| Body | Monotube, gas charged |
| Finish | Zinc plated, clear coated |
Vehicle fitment
It is a direct fit for the 1976–1983 Jeep CJ5 and the 1976–1986 Jeep CJ7, at a 3 to 4 inch lift.
The Wrangler YJ, TJ and later models are not covered by this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One front Pro Runner monotube shock, sold as each.






























