Overview
The Trail Master TM3730-40043 is a 3-inch suspension lift kit with front coil springs and rear leaf springs, made for vehicles that use the Chrysler 8.25-inch axle. Trail Master builds its systems for hard off-road trails while keeping the ride quiet and dependable on the street, with parts meant to limit wear on factory ball joints and steering components.
The kit comes with the control arms, brackets, springs and shocks needed to raise the vehicle, so no separate parts are required to complete the lift. The stated lift height range is 3 to 4.99 inches.
Key features
- Lower control arms made from high-grade alloy steel tube
- Flex-joint bushing technology
- Precision laser-cut bolt holes and CNC machined spindles
- CNC press-brake formed brackets
- Front coil springs paired with rear leaf springs
- Swaybar relocation brackets
- Lifetime warranty on all Trail Master kits
Choosing a lift height
Lift height is a balance between tire clearance, ride comfort and how the truck drives on the road. A lift in this range suits trucks that need more ground clearance without a full build. Consider the tire size you plan to run, since larger tires add rubbing risk and load on the suspension.
Front coil springs and rear leaf springs are often replaced as a pair so that front and rear heights stay even. Pairing the lift with new shocks, swaybar brackets and fresh bushings keeps the suspension working together. When comparing parts, look at how each one is made and how it mounts, not only at the height figure.
- Plan tire size before choosing the lift
- Keep front and rear heights even
- Inspect shocks at the same time as the springs
Specifications
| Brand | Trail Master |
|---|---|
| Part number | TM3730-40043 |
| UPC | 614901083514 |
| Lift height | 3 inches (range 3 to 4.99 inches) |
| Front suspension | Coil spring kit |
| Rear lift method | Leaf springs |
| Shocks | Included |
| Axle | Chrysler 8.25-inch |
| Maximum tire size | 31.10.50 |
| Warranty | Lifetime on Trail Master kits |
The control arms, brackets and springs work as one package, so the front and rear are set together during the lift. The parts are designed to limit wear on factory ball joints and steering components, which matters more on rough trails. Because both ends are raised, check wheel alignment and driveline angles after the work is complete.
Vehicle fitment
The kit is built for the Chrysler 8.25-inch axle. Confirm that your vehicle has that axle before ordering.
Vehicles with other axles are outside this kit’s design. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Raising the suspension changes ride height and driveline angles, so have the alignment checked and the driveline inspected after installation.
What’s included
Front coil springs, lower control arms, swaybar relocation brackets, rear leaf springs and shocks.









