Overview
The Trail Master 2.5-inch Lift Kit with CGS Shocks, model TM3525-20012, raises a leaf spring vehicle 2.5 inches and clears 31×10.50 tires. The kit is built around lifted leaf springs and includes U-bolts and all hardware, plus a replacement CGS shock.
The kit also increases ground clearance from the lift height.
The kit is designed for leaf spring trucks and gives 2.5 inches of lift, with lifted leaf springs as its main component. U-bolts and all hardware are included, so the springs can be installed with the supplied parts.
If you run twin-tube shocks, the rear shock relocation bracket RE2007 is required. Lifts over 1.5 inches can need driveline modifications on some vehicles, so check your driveline before installation. The kit clears 31×10.50 tires and improves ground clearance through the lift.
The lifted leaf springs are designed for a smooth ride. U-bolts and all hardware come with the kit, so installation uses the supplied parts.
Key features
- Lifted leaf springs
- U-bolts and all hardware included
- Replacement CGS shocks included
- Clears 31×10.50 tires
- Installation uses the supplied U-bolts and hardware.
Before you install
Leaf spring lifts change the geometry of the rear axle, so how the truck tracks and handles can shift after installation. The springs carry the axle load, and a higher arch changes the driveline angle, which is why the driveline check matters. Plan on a wheel alignment and a look at brake lines, wiring and fuel lines once the lift is in.
U-bolts are the part most often overlooked. The springs settle after the first drives, and the nuts can loosen, so re-torque them and inspect the shackles and bushings at the same time. Replace worn hardware before it causes shifting or noise.
- Check the driveline angle before highway driving
- Re-torque U-bolts after the first few trail runs
- Inspect shock mounts and brackets for clearance
- Recheck wheel alignment after the lift settles
Specifications
| Brand | Trail Master |
|---|---|
| Part number | TM3525-20012 |
| UPC | 614901082531 |
| Lift height | 2.5 inches |
| Suspension type | Leaf spring |
| Maximum tire size | 31×10.50 |
Vehicle fitment
No vehicle is named for this kit and no fitment list is available. Check Trail Master specifications for the model and year that use this leaf spring lift.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
If you run twin-tube shocks, the rear shock relocation bracket RE2007 is required. Height increases over 1.5 inches can need driveline modifications on some vehicles.
What’s included
Lifted leaf springs, U-bolts, all hardware and a replacement CGS shock.









