Overview
The Trail Gear Solid Axle Swap lift kit A, part number TGI110213-1-KIT, fits the 1996–1997 and 1999–2004 Toyota Tacoma in the Base, Limited, Pre Runner, S-Runner and SR5 versions. It is a solid axle swap kit for the Tacoma.
The kit replaces the factory independent front suspension (IFS) components with leaf springs and a live axle, also called a solid axle. The lift height range is 0 to 3.5 inches.
Key features
- Solid axle swap for the Toyota Tacoma
- Replaces the factory IFS components
- Leaf springs at the front
- Live or solid axle
- Listed lift height range of 0 to 3.5 inches
Before the solid axle swap
A solid axle swap changes more than ride height. The live axle moves the front wheels as one unit, so steering, driveline angles and brake line routing all need to be checked during the job. Plan extra time for alignment and for reworking the steering linkage so the new front end tracks straight.
Worn ball joints, tie rod ends and bushings are often replaced at the same time so the new components start in good condition. Inspect the front driveshaft u-joints and the transfer case output after the swap, because the changed axle height can increase joint angles.
- Re-torque axle and spring fasteners after the first few trail runs
- Recheck steering alignment after the first highway drive
- Inspect driveshaft u-joints for play and binding
- Confirm brake lines reach without strain at full droop
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | TGI110213-1-KIT |
| Kit type | Solid axle swap |
| Front suspension | Leaf springs with live axle |
| Lift height range | 0 to 3.5 inches |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1996–1997 and 1999–2004 Toyota Tacoma in the Base, Limited, Pre Runner, S-Runner and SR5 versions. Make sure your year, model and trim match before ordering.
The 1995 and 1998 Tacoma model years and the 2005 and later trucks are not on the list.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A solid axle swap changes the front suspension geometry, the steering and the driveline angles, so the work calls for a complete alignment and driveline check after installation.
What’s included
The kit includes the leaf springs and live axle that replace the factory IFS parts. Check the package contents against your installation before starting.







