Overview
The Crown Automotive manual steering lower shaft assembly, part J5353135, is made for Jeep CJ5, CJ7 and Scrambler vehicles without power steering. Its listed years are 1976–1983 for the CJ5, 1976–1986 for the CJ7 and 1981–1985 for the Scrambler.
Trims named across the CJ models include Base, Golden Eagle, Laredo, Limited and Renegade. The CJ7 list also includes Golden Hawk, and the Scrambler list includes SL and SR.
Key features
- Manual steering application
- Complete lower assembly
- Covers three CJ-era Jeep models
- Part number J5353135 and UPC 848399063165
Manual steering on CJ models
Manual steering on a CJ uses a direct mechanical link from the steering wheel to the front wheels, so the shaft and joints must move freely and stay tight. A worn lower shaft shows up as slop at the wheel, a rattle from under the dash or a wheel that drifts on the road. With no power assist to mask play, these signs are easy to feel.
When replacing the assembly, check the steering box mount, the column coupling and the drag link at the same time. Lubricate the joints as part of the job, and make sure the shaft clears the floor and firewall through the full turn. Recheck steering centering after installation and confirm the wheel returns cleanly after a turn.
- Check joints for play with the front wheels off the ground
- Inspect the column bushing and mount
- Look for worn or dry steering box connections
- Confirm steering returns to center after installation
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J5353135 |
| UPC | 848399063165 |
| Position | Lower |
| Steering type | Manual, without power steering |
| Assembly | Lower steering shaft assembly |
Vehicle fitment
It fits the 1976–1983 Jeep CJ5, 1976–1986 Jeep CJ7 and 1981–1985 Jeep Scrambler.
It is designed for manual steering vehicles. Confirm the steering type and your year, model and trim before ordering.









