Overview
It is a heavy-duty manual steering shaft for Jeep vehicles and serves as a direct replacement for the stock shaft. It is built to original specifications with more strength than the stock part.
This Jeep shaft is a direct OE replacement and carries a limited five year warranty.
Key features
- Manual steering application
- Upgrade in strength over the stock shaft
- Direct replacement design
- Built to original specifications by Omix-ADA
Manual steering shaft basics
A manual steering shaft carries the driver’s input from the column to the steering box with no assist in the line. Because of that, the shaft is the link that every turn of the wheel depends on, and any slack or stiffness in it is felt right at the wheel. Heavy duty shafts are often chosen for trucks that run larger tires, since the extra torque loads the joints and the column more than stock.
Most manual shaft problems come from worn universal joints, loose pinch bolts or a column that has moved in its mounts. Inspect the joints for play when the wheel is turned slightly back and forth, and look for grease leaks or rust at the flange. If the steering box is also worn, a new shaft will not remove the play, so check both together.
- Inspect universal joints for play and dryness
- Check pinch bolts and column mounts
- Look at steering box play before blaming the shaft
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 18024.01 |
| UPC | 804314141011 |
| Steering type | Manual |
| Warranty | Limited five year warranty |
Vehicle fitment
Steering shafts are sized for specific Jeep models and years. Confirm fit for your Jeep’s year, model and steering type before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The kit is one heavy-duty manual steering shaft. Check the package contents against your installation before starting.









