Overview
The Crown Automotive steering shaft, part 52007017, is a lower shaft that attaches the steering box to the steering column on power steering Jeep Wrangler YJ models from 1987 to 1995.
The shaft covers the 1987–1995 Wrangler (YJ) across the Base, Islander, Laredo, Renegade, Rio Grande, S and Sahara trims. It is a lower position shaft for this vehicle.
Key features
- Lower position steering shaft
- Attaches the steering box to the column
- Built for power steering models
- Fitment list covers 1987–1995 Wrangler YJ trims
Matching the steering setup
A lower steering shaft carries steering input from the steering box to the column, so any play or binding at this joint shows up as vague steering or a wandering front end. On older Wranglers the shaft is often the first place to check when the steering feels loose, because the connection points work through years of flex and vibration.
Before replacing it, confirm the steering box and column are the same type as the shaft’s intended setup. Look at the splines or couplings, the pinch bolts and the pin alignment, and make sure the new part sits square without forcing it. Worn universal joints, a loose steering box or a damaged column can mimic a bad shaft, so inspect them as well. Take your time and recheck the fit with the wheels pointed straight ahead.
- Check pinch bolts for tightness
- Look for cracks near the joint
- Confirm the column turns smoothly by hand
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 52007017 |
| UPC | 848399013900 |
| Position | Lower |
| Steering type | Power steering models |
| Connection | Steering box to column |
Vehicle fitment
It fits 1987–1995 Jeep Wrangler (YJ) models in the Base, Islander, Laredo, Renegade, Rio Grande, S and Sahara trims.
It does not fit 1997–2006 Wrangler (TJ) or later Wranglers. Confirm fit for your vehicle’s year, model and trim before ordering.









