Overview
The Crown Automotive lower steering shaft, part 52079050, attaches the steering box to the column on power steering Jeep Grand Cherokee ZJ models from 1995 to 1998. It has flexible end joints.
The shaft fits 1995–1998 Jeep Grand Cherokee (ZJ) models in 5.9 Limited, Laredo, Limited, Orvis, SE and TSi trims. Other Grand Cherokee generations, such as the WJ, are not covered.
Key features
- Attaches the steering box to the column
- Flexible end joints
- Built for power steering models
- Lower position shaft
Inspecting the joints
Flexible end joints absorb small angle changes between the steering box and column as the front suspension moves. Over time the rubber or flex material can crack, swell or lose its grip on the splines, and that wear shows up as slack in the steering wheel or a faint clunk over bumps. Checking the joints every so often on a trail rig helps catch problems before they affect control.
When replacing a shaft, set the steering box at center and align the new shaft before tightening the pinch bolts. Keep the column and box clean around the connection, and make sure the shaft is not pressed against the frame or exhaust. A worn steering box or loose column bracket can feel like a bad shaft, so inspect them at the same time.
- Look for cracks around the flex joints
- Check pinch bolts after the first drive
- Make sure the shaft clears the frame and linkage
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 52079050 |
| UPC | 848399015423 |
| Position | Lower |
| Steering type | Power steering models |
| End joints | Flexible |
Vehicle fitment
It fits 1995–1998 Jeep Grand Cherokee (ZJ) models in 5.9 Limited, Laredo, Limited, Orvis, SE and TSi trims.
The WJ Grand Cherokee and other generations are not covered. Confirm your vehicle’s year, model and trim before ordering.









