Overview
The Trail Gear 130032-1 is a replacement nut and washer for bolting the pitman arm to the steering box. It is designed for 4WD IFS steering boxes on 1986-1995 Pickup and 4Runner models.
Match it to your steering box application before installing.
Key features
- Replacement nut and washer
- Pitman arm to steering box attachment
- 4WD IFS steering box application
- Covers 1986-1995 model years
Pitman arm fastener care
The pitman arm nut carries the load between the steering box output shaft and the arm, so it has to stay tight and seated. Before reassembly, clean the shaft threads and the taper where the arm sits. Any grit or rust in that joint can let the arm loosen under repeated steering loads, which shows up as play or a clunk when turning.
Inspect the nut, washer and shaft every time the joint is opened. Look for stretched threads, cracks and flattened washer faces. Torque the nut to the value in a service manual for your steering box, and check it again after the first few drives on rough roads, since off-road bumps can work fasteners loose.
- Clean the shaft taper before reassembly
- Look for play or a clunk when turning
- Replace a bent or flattened washer
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 130032-1 |
| Item | Nut and washer |
| Application | 4WD IFS steering box |
| Years named | 1986-1995 |
| Models named | Pickup and 4Runner |
Vehicle fitment
Confirm fit for your vehicle’s year, model and steering box before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The product covers a nut and washer for the pitman arm. No other parts are named.









