Overview
The Trail Gear TG Weld Washer, part number TGI300585-KIT, is a weld washer kit in the brakes and steering category. Trail Gear states universal fit, so the washer is not tied to one vehicle, and the published details name no years or models.
The title reference is 300585-KIT. Measure the washer’s material, dimensions and intended use against your application before fitting it.
Measuring before you weld
A weld washer sits between a fastener and a mating surface, so its inside diameter, outside diameter and thickness need to suit the bolt and the surface it bears on. A washer that is too thin can deform under torque, while one that is too thick can prevent the fastener from seating. Measuring the bolt and the bearing surface before you buy or weld avoids most fit problems.
Universal fit means the washer is not tied to a specific vehicle, so the decision rests on your own measurements. Compare the kit contents with the job, and keep spare washers of the same type in case one is damaged during fitting. Clean the mating surfaces so the washer sits flat and the weld has solid metal to fuse to.
Welding near brake or steering components calls for care. Heat can affect nearby seals, hoses and bushings, so shield them, use a heat sink where practical, and let parts cool before testing movement. Re-check fasteners after the first short drive.
- Match the inside diameter to the fastener
- Check thickness against the load path
- Clean paint, rust and debris from the surface
- Shield seals and hoses from weld heat
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | TGI300585-KIT |
| Title reference | 300585-KIT |
| Fitment type | Universal fit |
| Category | Brakes and steering |
Vehicle fitment
Trail Gear states universal fit for this weld washer, so it is not built for a specific vehicle. No vehicle list is published for it.
Because universal fit does not confirm sizing, measure the washer against your application before use. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the pieces in the kit against your installation before starting.
Not included: Welding equipment and other hardware the kit may need are not covered here. Plan for them before starting.









