Overview
The Trail Gear Misalignment Spacers, part number TGI186031-KIT, are high misalignment spacers sized for a 9/16 inch bore. Trail Gear describes them as a way to extend the ball’s spherical diameter inside the rod end.
The spacers extend the ball’s spherical diameter inside the rod end, which is intended to increase articulation, suspension travel and rod end life.
Key features
- 9/16 inch bore
- Extends the ball’s spherical diameter
- Said to add articulation and suspension travel
- Part number TGI186031-KIT
Installation and fit checks
Spacer installation starts with the rod end. Confirm the joint type and the diameter of the ball, then compare them with the spacer before pressing anything into place. A snug fit that does not seat fully will not let the ball move as intended.
Seating a spacer correctly takes patience. Clean the bore, check for burrs and make sure the spacer sits square. After assembly, rotate the joint by hand to feel for tight spots before returning the vehicle to the ground.
Off-road use puts extra strain on these joints, so inspect them more often than a street vehicle would need. Mud and grit work into the seal quickly, and a damaged seal can let the joint run dry.
- Confirm joint type and ball diameter
- Clean and deburr the bore
- Rotate the joint by hand after installation
- Inspect seals after mud runs
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | TGI186031-KIT |
| Bore | 9/16 inch |
| Product type | Misalignment spacers |
| Fitment | Universal fit; no vehicle named |
Vehicle fitment
Universal fit is the only fitment stated. The 9/16 inch bore is the detail to match against your joint before using these spacers.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Count the spacers supplied against your installation before you start.









