Overview
The Trail Gear Misalignment Spacers, part number TGI186011-KIT, are high misalignment spacers with a 5/8 inch bore. Their job is to let the edge of the ball turn into the body of the rod end, which Trail Gear says increases misalignment.
The spacers are designed to add suspension travel and extend rod end life, and they let the ball edge turn into the rod end body to increase misalignment.
Key features
- Increases misalignment by letting the ball edge rotate into the rod end
- Bore of 5/8 inch
- Stated benefits: greater articulation and more suspension travel
- Stated benefit: longer life for the rod end
Choosing the right bore
Bore is the fit point that matters most with a spacer. The spacer has to sit correctly in the rod end, so a size that is close is not enough. Measure the joint with calipers and compare the result to the bore before starting the installation.
Spacers add range by letting the ball edge turn into the body. That range is only useful if the rest of the steering and suspension geometry can handle the extra angle, so check for binding at full lock and full compression after installation.
Grease fittings, dust boots and retaining hardware should be checked during the job. Replace any boot that is cracked, since dirt will shorten the joint’s life regardless of the spacer.
- Measure the rod end bore with calipers
- Check for binding at full steering lock
- Test suspension travel after installation
- Replace cracked boots during the job
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | TGI186011-KIT |
| Bore | 5/8 inch |
| Product type | Misalignment spacers |
| Fitment | Universal fit; no vehicle named |
Vehicle fitment
This spacer set is not matched to a vehicle. Universal fit means the 5/8 inch bore has to be checked against your rod end, not against a model name.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Count the spacers you received against your installation plan before you start.









