Overview
The Trail Gear 110134-1-KIT is a 5-inch HD IFS eliminator kit for 1986–1995 Toyota Pickup and 4Runner models. It uses HD front leaf springs to replace the factory independent front suspension with a solid axle setup.
Trail Gear describes its solid axle swap kits as complete packages with a front diff armor plate and upper axle gusset, plus wheel bearing and knuckle service kits. The kit assumes a matching rear lift and a donor front axle, and neither is supplied.
Key features
- 5-inch lift height
- HD front leaf springs
- Hi-Steer kit and drop hanger
- Greasable shackles
- Steering stabilizer kit
- Shock hoops and front shocks
- Brake lines and brake rotors
- Wheel spacers and bump stops
- Diff armor plate and upper axle gusset
Planning the solid axle conversion
A solid front axle conversion changes more than the springs. Steering, brakes, driveline angles and the front track all shift once the independent front suspension is removed, so the work is best treated as a complete project. Check that the donor axle, rear lift and driveline are sorted before the old front components come off, since a half-finished swap can leave the vehicle unusable.
Leaf spring kits often bring a heavier load on the frame mounts and the spring hangers. Inspect the frame where the new spring perches attach and look for cracks or prior repairs. Expect to replace front tie rod components, wheel bearings and brake hoses during the same job, because they are commonly disturbed or worn by the time the conversion is done.
- Inspect frame mounts before bolting in new springs
- Plan driveline angles with the rear lift in place
- Replace worn bearings and hoses during the swap
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 110134-1-KIT |
| UPC | 70000621376 |
| Lift | 5 inch |
| Lift height range | 5 to 6.99 inches |
| Suspension type | Leaf spring |
| Rear lift method | None |
| Position | Front |
| Shocks included | Yes |
Vehicle fitment
The manufacturer fitment list names the 1986–1995 Toyota 4Runner in the DLX and SR5 trims, and the 1986–1995 Toyota Pickup in the Base, Base Turbo, DLX, SR5 and SR5 Turbo trims.
Tacoma and other Toyota years are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Heavy-duty leaf springs and a 5-inch height change front alignment and steering geometry, so schedule a full alignment after the swap.
What’s included
HD front leaf springs, Hi-Steer kit, drop hanger, greasable shackles, steering stabilizer kit, shock hoops, front shocks, brake lines, brake rotors, wheel spacers, bump stops and diff armor plate.
Not included: the matching rear lift, the donor front axle from a 79–85 Pickup or 4Runner, and the long spline drive shaft.









