Select your vehicle

Trail Gear 3 Inch Lift Leaf Springs – 110053-3-KIT

Trail Gear

Shop Trail Gear Leaf Springs on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Trail Gear 110053-3-KIT front leaf springs for Suzuki Samurai
  • 3 inch lift with military wrap on fixed end
  • Front pair; bushings not included

Description

Overview

The Trail Gear 110053-3-KIT is a front leaf spring kit for the Suzuki Samurai that provides 3 inches of lift. It is sold as a front pair, and the same range includes rear springs.

It uses a spring pin setup for a spring-under configuration and a military wrap on the fixed end. It is a direct fit for the Suzuki Samurai. Confirm fit for your vehicle’s year, model and trim before ordering.

Key features

  • 3 inch of lift
  • Military wrap on the fixed end
  • Spring pin setup for spring-under configuration
  • Front pair listed

Before installing lift springs

Lift leaf springs raise the body by changing the arch of the spring, which also shifts the angle of the axle relative to the driveline. Higher lift usually means checking driveshaft angles, brake line length and the condition of the shock absorbers, since they must work through their full travel with the new ride height. Steering geometry and tire clearance also deserve a look, because the axle position changes once the springs are installed.

Spring pin setups and military wraps depend on clean, square mounting surfaces. Inspect the old springs for cracked or sagging leaves, worn eye bushings and loose U-bolts before reusing any hardware.

  • Check shock length against the new ride height
  • Inspect bump stops and shackles
  • Re-torque U-bolts after the first drives

Specifications

Brand Trail Gear
Part number 110053-3-KIT
UPC 70000621417
Lift 3 inches
Lift height range 0 to 4.99 inches
Spring quantity Pair
Position Front
Eye style Military wrap on fixed end
Spring configuration Spring-under (pin setup)
Bushings Not included

Vehicle fitment

It is a direct fit for the Suzuki Samurai. Confirm the model year range before ordering.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The pin setup is for a spring-under configuration, so confirm your mounting matches it before fitting the springs.

What’s included

A front pair of Suzuki Samurai leaf springs.

Not included: Bushings.

SKU: TGI110053-3-KIT Category:

Specification

Shipping weight 49.00 lbs
Package dimensions 44.50 × 20.00 × 4.50 in
brands

Questions & Answers

Does the Trail Gear 110053-3-KIT fit a Suzuki Samurai?

Yes. It is a direct fit for the Suzuki Samurai, and it is sold as a front pair of leaf springs with 3 inches of lift. Confirm the year and model range against your vehicle before ordering.

Does this Trail Gear kit include bushings?

No. Bushings are not included, so any bushings you need must be bought separately. The kit is a front pair of springs.

What lift does the 110053-3-KIT provide?

It provides 3 inches of lift, with a lift height range of 0 to 4.99 inches. The part number is 110053-3-KIT and the brand is Trail Gear.

Do lift springs affect other parts of the suspension?

Yes. Higher springs change the axle angle, so driveshaft angles, brake lines and shock length are often checked at the same time. Worn shocks and bump stops are commonly replaced alongside lift springs.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Trail Gear Leaf Springs on Amazon