Overview
The ARB CS046RB is a heavy-load leaf spring from ARB 4×4 Accessories, part number CS046RB. It is a direct fit for the 1998–2004 Toyota Tacoma, covering the Base, Limited, Pre Runner, S-Runner and SR5 models. The two-stage pack carries the vehicle unladen and adds the secondary leaves as the load increases.
ARB builds the leaves with draw tapered, diamond cut ends and a graphite coating. Shot peening on the tension side and nylon anti-friction pads at the leaf tips complete the design. Each spring is scragged and load tested against its specification.
The CS046RA and CS046RB share a part family and the same Tacoma fitment list, so the heavy-load rating is what separates them. Heavier trucks and trucks that carry gear regularly are the reason to choose the heavy-load version, and the lighter spring suits a truck that runs mostly unladen.
The CS046RA is the lighter rating in the same family, and the CS046RB’s two-stage design gives comfort unladen and extra capacity under load. Its graphite coating, shot peened tension side and nylon pads match the finishes on the lighter spring.
Because the two springs share a fitment list, the load rating is the main reason to choose one over the other for a particular truck.
Key features
- Heavy-load rating for added capacity.
- Two-stage leaf pack for ride comfort and support.
- Draw tapered leaves spread load over a larger surface.
- Diamond cut leaf ends reduce stress at the tips.
- Fully scragged and load tested.
- Graphite coating lowers friction between leaves.
- Regreasable nylon interleaf pads.
- Shot peened tension side of each leaf.
Choosing between load ratings
Load rating is the main decision for a Tacoma owner choosing between two similar springs. A truck that hauls gear, carries a camper or tows regularly needs the extra support of a heavy-load pack. A truck that is mostly unladen will ride more comfortably on a lighter rating, though it gives up some capacity.
Leaf springs wear at the leaf tips, the center bolt and the eye bushings. Before fitting a new pack, inspect the shackles and mounts, since worn hardware can change how the spring loads. After the first drives, check the U-bolts and center bolt for tightness, and listen for creaks at the pads.
- Match the rating to typical payload
- Inspect the leaf tips for cracks
- Recheck fasteners after the first trips
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | CS046RB |
| UPC | 700003747881 |
| Load rating | Heavy load |
| Leaf pack | Two-stage |
| Leaf ends | Draw tapered, diamond cut |
Vehicle fitment
It is a direct fit for the 1998–2004 Toyota Tacoma in Base, Limited, Pre Runner, S-Runner and SR5 trims.
Tacoma years outside 1998–2004 are not on the list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One leaf spring. Verify the hardware you need before installing the new spring.




