Overview
The Skyjacker TR40S is a rear Softride leaf spring for the 1980–1988 Toyota Pickup and the 1985–1989 Toyota 4Runner. Listed trims are Pickup Base, Base Turbo, DLX, SR5 and SR5 Turbo, and 4Runner DLX and SR5.
The spring is a single rear unit built from American steel as a progressive multileaf pack. Its load capacity meets or exceeds the original equipment spring, and the lift height range is 0 to 4.99 inches. Bushings are not included, and the recommended bushing is SKYSE35T.
Key features
- Progressive multileaf pack from American steel
- Load capacity meets or exceeds the original equipment spring
- Lift height range 0 to 4.99 inches
- Direct fit for the listed Pickup and 4Runner trims
- Single spring per unit
- Limited lifetime warranty
Rear axle position after a swap
The rear leaf spring holds the axle under the frame and sets how the axle rotates under load. A new spring changes that position slightly, which changes the pinion angle and the driveshaft’s operating angles. Those angles matter because steep or mismatched joints wear quickly and cause vibration at highway speed.
Set the new spring with the axle under the truck at its normal ride height, then tighten the hardware. Look at the shock mounts and bump stops for clearance at full travel. A Pickup or 4Runner that has been lifted or loaded heavily benefits from a driveline check, since the spring rate and the load it carries both affect how the axle settles.
- Check pinion angle after the swap
- Inspect shock clearance at full travel
- Recheck U-bolts after the first drives
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | TR40S |
| UPC | 803696164151 |
| Position | Rear |
| Spring quantity | Single spring |
| Bushings | Not included |
| Recommended bushing | SKYSE35T |
| Construction | Progressive multileaf pack |
| Material | American steel |
| Lift height range | 0 to 4.99 inches |
| Fitment type | Direct fit |
| Warranty | Limited lifetime |
Vehicle fitment
It fits the 1980–1988 Toyota Pickup (Base, Base Turbo, DLX, SR5, SR5 Turbo) and the 1985–1989 Toyota 4Runner (DLX, SR5) as a direct fit.
Later Pickup generations and the Tacoma fall outside this fit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Have the recommended SKYSE35T bushing ready, since the spring does not include one. Changing to this spring alters the ride height and rear axle position, so an alignment check afterward is a sensible step.
What’s included
One rear leaf spring.
Not included: spring bushings, including the recommended SKYSE35T.





