Select your vehicle
-13%

Pro Comp 4 Inch Rear Leaf Spring – 33311

Pro Comp Suspension

Shop Toyota Pickup Leaf Springs on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rear single leaf spring with a 4 inch lift
  • Diamond cut multi-leaf design with polyurethane bushings included
  • Fits 1980–1988 Toyota Pickup and 1984–1985 Toyota 4Runner

Description

Overview

The Pro Comp 4 Inch Rear Leaf Spring, part number 33311, is a single rear leaf spring that adds 4 inches of lift. It fits the 1980–1988 Toyota Pickup and the 1984–1985 Toyota 4Runner.

The spring uses diamond cut multi-leaf construction and urethane bushings. It is designed to add clearance and improve ride quality.

Key features

  • 4 inch rear lift
  • Diamond cut multi-leaf construction
  • Polyurethane bushings included
  • Single spring per part
  • Additional clearance and improved ride quality.

What a rear lift changes

A rear lift raises the axle relative to the frame, which changes the angle of the driveshaft and pinion. Greater angles can increase vibration and wear the universal joints faster, so inspect the joints and yoke for play after the first few drives. Shocks, brake lines and the rear bumper may also need attention because the axle sits in a new position.

Older Toyota trucks often have worn bushings, rusty shackles and tired shocks, and those parts are commonly replaced alongside leaf springs. Pairing new springs with fresh shackle hardware keeps the rear end square. Check rear tire clearance at full compression and after a full steering turn to make sure the new height does not cause rubbing.

  • Check U-joints for play after installation
  • Inspect brake lines for stretch
  • Look for tire rubbing at full compression
  • Replace worn shackle hardware with the springs

Specifications

Brand Pro Comp Suspension
Part number 33311
Position Rear
Lift height 4 in
Spring quantity Single spring
Leaf style Multi-leaf, diamond cut
Bushings Polyurethane, included
Fitment type Direct fit

Vehicle fitment

It fits the 1980–1988 Toyota Pickup and the 1984–1985 Toyota 4Runner, covering the model variants in those ranges.

4Runner years after 1985 and Pickup years after 1988 are not on the list, and no other Toyota model is listed. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

A 4 inch rear lift changes driveline angles, so check the driveline angles after installing the spring.

What’s included

One rear leaf spring with polyurethane bushings.

SKU: EXP33311 Category:

Specification

Shipping weight 31.90 lbs
Package dimensions 43.00 × 10.00 × 3.00 in
brands

Fitment

VehicleYearsTrims
Toyota 4Runner1984–1985DLX, SR5
Toyota Pickup1980–1988Base, Base Turbo, DLX, SR5, SR5 Turbo

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the Pro Comp 33311 fit a 1985 Toyota 4Runner?

Yes. It fits the 1984 and 1985 Toyota 4Runner, along with the 1980 to 1988 Toyota Pickup. Later 4Runner years are not covered, so confirm your model year before installing.

Does the spring include bushings?

Yes. Polyurethane bushings are included with the spring. It is a single rear leaf spring that adds 4 inches of lift, so one spring is supplied per part.

How much lift does it add?

It adds 4 inches of lift at the rear. The diamond cut multi-leaf design adds clearance and improves ride quality.

Do shocks need replacing when adding a rear leaf spring?

Not always, but worn shocks are commonly replaced with new springs because rear height changes. Check shocks for leaks and worn mounts, and confirm they suit the new ride height before installing.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Toyota Pickup Leaf Springs on Amazon