Overview
The Pro Comp 90-4107B is a drive shaft spacer sized for a 6 in rear lift or an 8.5 in front lift. It is part number 90-4107B.
Drive shaft spacers are matched to a lift height, so the lift size is the number to match.
Key features
- 6 in rear lift size
- 8.5 in front lift size
Lift height and driveline angle
A drive shaft spacer moves the driveshaft rearward or forward to keep the joint angles in a workable range after a suspension lift. When the lift changes the pinion or transfer case angle, the driveshaft can bind, vibrate, or wear the universal joints early. A spacer addresses that change by restoring the geometry the factory layout expected.
Choosing the right spacer starts with the lift height and which end of the vehicle is raised, since front and rear spacers are sized differently. Compare the spacer with the other driveline parts you run, such as slip yokes and universal joints, because those often need checking at the same time.
After installation, check the driveshaft for vibration at highway speed, look for play in the joints, and confirm the spacer bolts stay tight after the first few drives.
- Check universal joints for play after installation
- Re-check spacer bolts after the first few drives
- Watch for driveline vibration at highway speed
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 90-4107B |
| UPC | 614901114607 |
| Rear lift | 6 in |
| Front lift | 8.5 in |
Vehicle fitment
Match the spacer to your vehicle’s lift height, and confirm fit for its year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One drive shaft spacer, part number 90-4107B.









