Overview
The Trail Gear 140054-1-KIT is a bump stop extension kit that includes two bumpstops and two extensions. It is made of urethane and marked universal fit, with no specific vehicle or lift height named.
Trail Gear identifies this set by the number 140054-1-KIT and UPC 70000621328.
Key features
- Two bumpstops included
- Two bumpstop extensions included
- Urethane bump stop type
Setting up bump stops
Bump stops limit how far the suspension can compress before the axle or frame contacts the stop. Extensions raise that contact point, which changes when the stop engages and how hard the impact feels. Because urethane compresses under load, it should be inspected for cracks, flattening and loose mounting hardware.
Before adding extensions, check the full range of travel with the wheels off the ground, and watch for contact with brake lines, shocks and the driveshaft. Extensions that are too tall can cause the axle to bind or the tire to rub at full compression. Adjust stop height in small steps and retest after each change.
- Check travel with the wheels off the ground
- Watch brake lines and driveshaft clearance
- Inspect urethane for cracks and flattening
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 140054-1-KIT |
| UPC | 70000621328 |
| Material | Urethane |
| Quantity | Two bumpstops and two extensions |
Vehicle fitment
No vehicle is named for this kit. Universal fit means the extensions must be checked against your own bump stop mounts and suspension travel before installation.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Two bumpstops and two bumpstop extensions, as the kit description states.







